ATSAM3SD8CA-CU
The SAM3SD8C is a member of the Microchip's SAM3S series microcontrollers based on the high-performance 32-bit ARM® Cortex®-M3 RISC processor. It operates at a maximum speed of 64MHz and features 512KB of flash memory in two 256KB banks, as well as 64KB of SRAM. The extensive peripheral set includes
Microchip
Hết hàng
Đang sản xuất
32-bit Microcontroller
Vi điều khiển (MCU) & bộ xử lý
Tài liệu chính thức
Tài liệu chính thứcThông số kỹ thuật
| Thông số | Giá trị |
|---|---|
| Status | In Production |
| Packages | 100\LQFP,100\TFBGA |
| SPI | 4 |
| I2C | 2 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 12 |
| ADC Channels | 15 |
| Pincount | 100 |
| Program Memory size (KB) | 512 |
| Number of Comparators | 1 |
| Part Family | ATSAM3SD8C |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.6 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 1 |
| DAC Resolution (Bits) | 12 |
| I/O Pins Max | 79 |
| Number of DACs | 1 |
| CPU Speed (MIPS/DMIPS) | 80 |
| CPU | Cortex-M3 |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 2 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 0 |
| LIN | No |
| DAC Outputs | 2 |
| Number of Op Amps | 0 |
| Watch Dog Timer | No |
| IrDA | Yes |
| Vbat/Vddbu battery backup | No |
| Kiến trúc | 32 |
| CRC | Yes |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 64 |
| 16-Bit Digital Timers | 6 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 4 |
| U(S)ART | 5 -UART |
| RAM Bytes | 65536 |
| Parallel Port | EBI |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | Yes |
| ADC Sampling Rate (ksps) | 1000 |
| Direct Memory Access (DMA) Channels | 22 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 0 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 1 |
| Low Power | No |
| CPU Speed Max MHz (megahertz) | 64 |
| Multiple output CCP (MCCP) | 0 |
| ADC Modules | 1 |
| Input Capture | 12 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Internal Voltage Reference (Bandgap) | Yes |
| Auxiliary Flash (KB) | 0 |
| PWM Resolution (ns) | 0 |
| 8-Bit Digital Timers | 0 x 8-bit |
| Comparator max speed (ns) | 100 |
| Data EEPROM (bytes) | 0 |
| QSPI | 0 |
| External Memory Bus Interface | No |
| FPU | No |
| SDIO/SD-CARD/eMMC | 1 |
| Part Prefix | SAM3 |
| Ext. DRAM Interface | No |
| USB | Full Speed |
| Code-Guard Security | None |
| Type of CAN module | None |
| Ethernet | None |
Giá và bao bì
| Thông số | Giá trị |
|---|---|
| Giá đơn vị | ¥49.36 / 1ku |
| Giá theo số lượng | 1-24:65.43 25-99:59.58 100-999:54.07 1000-4999:49.36 5000-999999:47.34 |
| Loại bao bì | TFBGA |
| Số chân | 100 |
| Phương thức đóng gói | TRAY |
| Nhiệt độ hoạt động | -40 ~ 85 °C |
Câu hỏi thường gặp
ATSAM3SD8CA-CU có hàng trong kho không?
ATSAM3SD8CA-CU hiện hết hàng; hãy xem xét linh kiện thay thế hoặc yêu cầu báo giá.
ATSAM3SD8CA-CU đã ngưng sản xuất (EOL) chưa?
Không, ATSAM3SD8CA-CU chưa ngưng sản xuất; hiện vẫn đang được sản xuất và có thể mua bình thường.
ATSAM3SD8CA-CU sử dụng gói nào?
100\LQFP,100\TFBGA
ATSAM3SD8CA-CU có bao nhiêu chân?
100
Điện áp cấp của ATSAM3SD8CA-CU nằm trong khoảng nào?
1.62 – 3.6
ATSAM3SD8CA-CU hoạt động trong dải nhiệt độ nào?
-40 °C – 85 °C
ATSAM3SD8CA-CU thuộc kiến trúc hay dòng sản phẩm nào?
Cortex-M3