ATSAM3SD8CA-CU
The SAM3SD8C is a member of the Microchip's SAM3S series microcontrollers based on the high-performance 32-bit ARM® Cortex®-M3 RISC processor. It operates at a maximum speed of 64MHz and features 512KB of flash memory in two 256KB banks, as well as 64KB of SRAM. The extensive peripheral set includes
Microchip
Out of stock
Active
32-bit Microcontroller
Microcontrollers & Processors
Official documents
Official documentsSpecifications
| Parameter | Value |
|---|---|
| Status | In Production |
| Packages | 100\LQFP,100\TFBGA |
| SPI | 4 |
| I2C | 2 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 12 |
| ADC Channels | 15 |
| Pincount | 100 |
| Program Memory size (KB) | 512 |
| Number of Comparators | 1 |
| Part Family | ATSAM3SD8C |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.6 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 1 |
| DAC Resolution (Bits) | 12 |
| I/O Pins Max | 79 |
| Number of DACs | 1 |
| CPU Speed (MIPS/DMIPS) | 80 |
| CPU | Cortex-M3 |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 2 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 0 |
| LIN | No |
| DAC Outputs | 2 |
| Number of Op Amps | 0 |
| Watch Dog Timer | No |
| IrDA | Yes |
| Vbat/Vddbu battery backup | No |
| Architecture | 32 |
| CRC | Yes |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 64 |
| 16-Bit Digital Timers | 6 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 4 |
| U(S)ART | 5 -UART |
| RAM Bytes | 65536 |
| Parallel Port | EBI |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | Yes |
| ADC Sampling Rate (ksps) | 1000 |
| Direct Memory Access (DMA) Channels | 22 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 0 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 1 |
| Low Power | No |
| CPU Speed Max MHz (megahertz) | 64 |
| Multiple output CCP (MCCP) | 0 |
| ADC Modules | 1 |
| Input Capture | 12 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Internal Voltage Reference (Bandgap) | Yes |
| Auxiliary Flash (KB) | 0 |
| PWM Resolution (ns) | 0 |
| 8-Bit Digital Timers | 0 x 8-bit |
| Comparator max speed (ns) | 100 |
| Data EEPROM (bytes) | 0 |
| QSPI | 0 |
| External Memory Bus Interface | No |
| FPU | No |
| SDIO/SD-CARD/eMMC | 1 |
| Part Prefix | SAM3 |
| Ext. DRAM Interface | No |
| USB | Full Speed |
| Code-Guard Security | None |
| Type of CAN module | None |
| Ethernet | None |
Price & Packaging
| Parameter | Value |
|---|---|
| Unit price | ¥49.36 / 1ku |
| Tier price | 1-24:65.43 25-99:59.58 100-999:54.07 1000-4999:49.36 5000-999999:47.34 |
| Package type | TFBGA |
| Pins | 100 |
| Carrier | TRAY |
| Temp. range | -40 ~ 85 °C |
FAQ
Is ATSAM3SD8CA-CU in stock?
ATSAM3SD8CA-CU is currently out of stock; consider alternative parts or request a quote.
Is ATSAM3SD8CA-CU discontinued (EOL)?
No, ATSAM3SD8CA-CU is not discontinued; it is currently in production and available to buy.
What package does ATSAM3SD8CA-CU use?
100\LQFP,100\TFBGA
How many pins does ATSAM3SD8CA-CU have?
100
What is the supply voltage range of ATSAM3SD8CA-CU?
1.62 – 3.6
Within what temperature range does ATSAM3SD8CA-CU operate?
-40 °C – 85 °C
What architecture or family does ATSAM3SD8CA-CU belong to?
Cortex-M3