ATSAM3SD8CA-CU
The SAM3SD8C is a member of the Microchip's SAM3S series microcontrollers based on the high-performance 32-bit ARM® Cortex®-M3 RISC processor. It operates at a maximum speed of 64MHz and features 512KB of flash memory in two 256KB banks, as well as 64KB of SRAM. The extensive peripheral set includes
Microchip
Rupture de stock
Actif
32-bit Microcontroller
Microcontrôleurs (MCU) et processeurs
Documents officiels
Documents officielsSpécifications techniques
| Paramètre | Valeur |
|---|---|
| Status | In Production |
| Packages | 100\LQFP,100\TFBGA |
| SPI | 4 |
| I2C | 2 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 12 |
| ADC Channels | 15 |
| Pincount | 100 |
| Program Memory size (KB) | 512 |
| Number of Comparators | 1 |
| Part Family | ATSAM3SD8C |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.6 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 1 |
| DAC Resolution (Bits) | 12 |
| I/O Pins Max | 79 |
| Number of DACs | 1 |
| CPU Speed (MIPS/DMIPS) | 80 |
| CPU | Cortex-M3 |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 2 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 0 |
| LIN | No |
| DAC Outputs | 2 |
| Number of Op Amps | 0 |
| Watch Dog Timer | No |
| IrDA | Yes |
| Vbat/Vddbu battery backup | No |
| Architecture | 32 |
| CRC | Yes |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 64 |
| 16-Bit Digital Timers | 6 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 4 |
| U(S)ART | 5 -UART |
| RAM Bytes | 65536 |
| Parallel Port | EBI |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | Yes |
| ADC Sampling Rate (ksps) | 1000 |
| Direct Memory Access (DMA) Channels | 22 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 0 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 1 |
| Low Power | No |
| CPU Speed Max MHz (megahertz) | 64 |
| Multiple output CCP (MCCP) | 0 |
| ADC Modules | 1 |
| Input Capture | 12 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Internal Voltage Reference (Bandgap) | Yes |
| Auxiliary Flash (KB) | 0 |
| PWM Resolution (ns) | 0 |
| 8-Bit Digital Timers | 0 x 8-bit |
| Comparator max speed (ns) | 100 |
| Data EEPROM (bytes) | 0 |
| QSPI | 0 |
| External Memory Bus Interface | No |
| FPU | No |
| SDIO/SD-CARD/eMMC | 1 |
| Part Prefix | SAM3 |
| Ext. DRAM Interface | No |
| USB | Full Speed |
| Code-Guard Security | None |
| Type of CAN module | None |
| Ethernet | None |
Prix et conditionnement
| Paramètre | Valeur |
|---|---|
| Prix unitaire | ¥49.36 / 1ku |
| Prix dégressif | 1-24:65.43 25-99:59.58 100-999:54.07 1000-4999:49.36 5000-999999:47.34 |
| Type de conditionnement | TFBGA |
| Broches | 100 |
| Support | TRAY |
| Plage de température | -40 ~ 85 °C |
Foire aux questions
ATSAM3SD8CA-CU est-il en stock ?
ATSAM3SD8CA-CU est actuellement en rupture de stock ; envisagez des alternatives ou demandez un devis.
ATSAM3SD8CA-CU est-il obsolète (EOL) ?
Non, ATSAM3SD8CA-CU n'est pas obsolète ; il est toujours en production active et disponible à l'achat.
Quel boîtier utilise ATSAM3SD8CA-CU ?
100\LQFP,100\TFBGA
Combien de broches possède ATSAM3SD8CA-CU ?
100
Quelle est la plage de tension d'alimentation de ATSAM3SD8CA-CU ?
1.62 – 3.6
Dans quelle plage de température ATSAM3SD8CA-CU fonctionne-t-il ?
-40 °C – 85 °C
À quelle architecture ou famille appartient ATSAM3SD8CA-CU ?
Cortex-M3