ATSAMG54G19B-UUT
The Microchip's SAM G54 embeds a Cortex-M4 CPU with an FPU (floating point unit) that ensures maximum throughput. This is very important as it allows you to minimize the active power consumption and get to sleep faster in order to reduce the overall power consumption. Additionally, the device has 16
Microchip
Sin stock
Activo
32-bit Microcontroller
Microcontroladores (MCU) y procesadores
Documentos oficiales
Documentos oficialesEspecificaciones técnicas
| Parámetro | Valor |
|---|---|
| Status | In Production |
| Packages | 100\LQFP,49\WLCSP |
| SPI | 1 |
| I2C | 3 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 12 |
| ADC Channels | 8 |
| Pincount | 100 |
| Program Memory size (KB) | 512 |
| Number of Comparators | 0 |
| Part Family | ATSAMG54 |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.6 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 0 |
| DAC Resolution (Bits) | 0 |
| I/O Pins Max | 38 |
| Number of DACs | 0 |
| CPU Speed (MIPS/DMIPS) | 96 |
| CPU | Cortex-M4 |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 0 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 0 |
| LIN | No |
| DAC Outputs | 0 |
| Number of Op Amps | 0 |
| Watch Dog Timer | Yes |
| IrDA | No |
| Vbat/Vddbu battery backup | No |
| Arquitectura | 32 |
| CRC | No |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 96 |
| 16-Bit Digital Timers | 3 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 0 |
| U(S)ART | 3 -UART |
| RAM Bytes | 98304 |
| Parallel Port | No |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 800 |
| Direct Memory Access (DMA) Channels | 28 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 1 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 0 |
| Low Power | Yes |
| CPU Speed Max MHz (megahertz) | 96 |
| Multiple output CCP (MCCP) | 0 |
| Input Capture | 12 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Auxiliary Flash (KB) | 0.512 |
| PWM Resolution (ns) | 0 |
| Comparator max speed (ns) | 0 |
| Data EEPROM (bytes) | 0 |
| Brown-Out Reset | None |
| QSPI | 0 |
| External Memory Bus Interface | No |
| FPU | Yes |
| SDIO/SD-CARD/eMMC | 0 |
| Part Prefix | SAMG |
| Ext. DRAM Interface | No |
| Class B Safety Library | No |
| Low Voltage Detection | None |
| Configurable Logic Cell Modules (CLC /CCL) Type | CLC |
| USB | None |
| Code-Guard Security | None |
| Hardware Touch Peripheral | None |
| Type of CAN module | None |
| Ethernet | None |
Precio y embalaje
| Parámetro | Valor |
|---|---|
| Precio unitario | ¥23.81 / 1ku |
| Precio por volumen | 1-24:31.47 25-99:28.71 100-999:25.89 1000-4999:23.81 5000-999999:22.66 |
| Tipo de envase | WLCSP |
| Patillas | 49 |
| Embalaje | LARGE T&R |
| Rango de temperatura | -40 ~ 85 °C |
Preguntas frecuentes
¿Está ATSAMG54G19B-UUT en stock?
ATSAMG54G19B-UUT no está en stock actualmente; consulte alternativas o solicite cotización.
¿Está ATSAMG54G19B-UUT descontinuado (EOL)?
No, ATSAMG54G19B-UUT no está descontinuado; sigue en producción activa y se puede comprar con normalidad.
¿Qué encapsulado utiliza ATSAMG54G19B-UUT?
100\LQFP,49\WLCSP
¿Cuántos pines tiene ATSAMG54G19B-UUT?
100
¿Cuál es el rango de tensión de alimentación de ATSAMG54G19B-UUT?
1.62 – 3.6
¿En qué rango de temperatura opera ATSAMG54G19B-UUT?
-40 °C – 85 °C
¿A qué arquitectura o familia pertenece ATSAMG54G19B-UUT?
Cortex-M4