ATSAMG54G19B-UUT
The Microchip's SAM G54 embeds a Cortex-M4 CPU with an FPU (floating point unit) that ensures maximum throughput. This is very important as it allows you to minimize the active power consumption and get to sleep faster in order to reduce the overall power consumption. Additionally, the device has 16
Microchip
Rupture de stock
Actif
32-bit Microcontroller
Microcontrôleurs (MCU) et processeurs
Documents officiels
Documents officielsSpécifications techniques
| Paramètre | Valeur |
|---|---|
| Status | In Production |
| Packages | 100\LQFP,49\WLCSP |
| SPI | 1 |
| I2C | 3 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 12 |
| ADC Channels | 8 |
| Pincount | 100 |
| Program Memory size (KB) | 512 |
| Number of Comparators | 0 |
| Part Family | ATSAMG54 |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.6 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 0 |
| DAC Resolution (Bits) | 0 |
| I/O Pins Max | 38 |
| Number of DACs | 0 |
| CPU Speed (MIPS/DMIPS) | 96 |
| CPU | Cortex-M4 |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 0 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 0 |
| LIN | No |
| DAC Outputs | 0 |
| Number of Op Amps | 0 |
| Watch Dog Timer | Yes |
| IrDA | No |
| Vbat/Vddbu battery backup | No |
| Architecture | 32 |
| CRC | No |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 96 |
| 16-Bit Digital Timers | 3 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 0 |
| U(S)ART | 3 -UART |
| RAM Bytes | 98304 |
| Parallel Port | No |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 800 |
| Direct Memory Access (DMA) Channels | 28 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 1 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 0 |
| Low Power | Yes |
| CPU Speed Max MHz (megahertz) | 96 |
| Multiple output CCP (MCCP) | 0 |
| Input Capture | 12 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Auxiliary Flash (KB) | 0.512 |
| PWM Resolution (ns) | 0 |
| Comparator max speed (ns) | 0 |
| Data EEPROM (bytes) | 0 |
| Brown-Out Reset | None |
| QSPI | 0 |
| External Memory Bus Interface | No |
| FPU | Yes |
| SDIO/SD-CARD/eMMC | 0 |
| Part Prefix | SAMG |
| Ext. DRAM Interface | No |
| Class B Safety Library | No |
| Low Voltage Detection | None |
| Configurable Logic Cell Modules (CLC /CCL) Type | CLC |
| USB | None |
| Code-Guard Security | None |
| Hardware Touch Peripheral | None |
| Type of CAN module | None |
| Ethernet | None |
Prix et conditionnement
| Paramètre | Valeur |
|---|---|
| Prix unitaire | ¥23.81 / 1ku |
| Prix dégressif | 1-24:31.47 25-99:28.71 100-999:25.89 1000-4999:23.81 5000-999999:22.66 |
| Type de conditionnement | WLCSP |
| Broches | 49 |
| Support | LARGE T&R |
| Plage de température | -40 ~ 85 °C |
Foire aux questions
ATSAMG54G19B-UUT est-il en stock ?
ATSAMG54G19B-UUT est actuellement en rupture de stock ; envisagez des alternatives ou demandez un devis.
ATSAMG54G19B-UUT est-il obsolète (EOL) ?
Non, ATSAMG54G19B-UUT n'est pas obsolète ; il est toujours en production active et disponible à l'achat.
Quel boîtier utilise ATSAMG54G19B-UUT ?
100\LQFP,49\WLCSP
Combien de broches possède ATSAMG54G19B-UUT ?
100
Quelle est la plage de tension d'alimentation de ATSAMG54G19B-UUT ?
1.62 – 3.6
Dans quelle plage de température ATSAMG54G19B-UUT fonctionne-t-il ?
-40 °C – 85 °C
À quelle architecture ou famille appartient ATSAMG54G19B-UUT ?
Cortex-M4