ATSAMG53G19A-UUT
The Microchip's SAM G53 has an ARM® Cortex®-M4 core with an FPU (floating point unit) to maximize data throughput. This allows you to minimize the active-mode power consumption and get the core into sleep mode faster, which will reduce the overall power consumption. The device has 16 DMA channels, w
Microchip
Sin stock
Activo
32-bit Microcontroller
Microcontroladores (MCU) y procesadores
Documentos oficiales
Documentos oficialesEspecificaciones técnicas
| Parámetro | Valor |
|---|---|
| Status | In Production |
| Packages | 100\LQFP,49\WLCSP |
| SPI | 1 |
| I2C | 3 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 12 |
| ADC Channels | 8 |
| Pincount | 100 |
| Program Memory size (KB) | 512 |
| Number of Comparators | 0 |
| Part Family | ATSAMG53 |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.6 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 0 |
| DAC Resolution (Bits) | 0 |
| I/O Pins Max | 38 |
| Number of DACs | 0 |
| CPU Speed (MIPS/DMIPS) | 48 |
| CPU | Cortex-M4 |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 0 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 0 |
| LIN | No |
| DAC Outputs | 0 |
| Number of Op Amps | 0 |
| Watch Dog Timer | Yes |
| IrDA | No |
| Vbat/Vddbu battery backup | No |
| Arquitectura | 32 |
| CRC | No |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 96 |
| 16-Bit Digital Timers | 3 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 0 |
| U(S)ART | 4 -UART |
| RAM Bytes | 98304 |
| Parallel Port | No |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 800 |
| Direct Memory Access (DMA) Channels | 28 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 1 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 0 |
| Low Power | Yes |
| CPU Speed Max MHz (megahertz) | 48 |
| Multiple output CCP (MCCP) | 0 |
| Input Capture | 6 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Auxiliary Flash (KB) | 0.512 |
| PWM Resolution (ns) | 0 |
| Comparator max speed (ns) | 0 |
| Data EEPROM (bytes) | 0 |
| Brown-Out Reset | None |
| QSPI | 0 |
| External Memory Bus Interface | No |
| FPU | Yes |
| SDIO/SD-CARD/eMMC | 0 |
| Part Prefix | SAMG |
| Ext. DRAM Interface | No |
| Class B Safety Library | No |
| Low Voltage Detection | None |
| Configurable Logic Cell Modules (CLC /CCL) Type | CLC |
| USB | None |
| Code-Guard Security | None |
| Hardware Touch Peripheral | None |
| Type of CAN module | None |
| Ethernet | None |
Precio y embalaje
| Parámetro | Valor |
|---|---|
| Precio unitario | ¥21.12 / 1ku |
| Precio por volumen | 1-24:28.04 25-99:25.49 100-999:23.07 1000-4999:21.12 5000-999999:20.17 |
| Tipo de envase | WLCSP |
| Patillas | 49 |
| Embalaje | LARGE T&R |
| Rango de temperatura | -40 ~ 85 °C |
Preguntas frecuentes
¿Está ATSAMG53G19A-UUT en stock?
ATSAMG53G19A-UUT no está en stock actualmente; consulte alternativas o solicite cotización.
¿Está ATSAMG53G19A-UUT descontinuado (EOL)?
No, ATSAMG53G19A-UUT no está descontinuado; sigue en producción activa y se puede comprar con normalidad.
¿Qué encapsulado utiliza ATSAMG53G19A-UUT?
100\LQFP,49\WLCSP
¿Cuántos pines tiene ATSAMG53G19A-UUT?
100
¿Cuál es el rango de tensión de alimentación de ATSAMG53G19A-UUT?
1.62 – 3.6
¿En qué rango de temperatura opera ATSAMG53G19A-UUT?
-40 °C – 85 °C
¿A qué arquitectura o familia pertenece ATSAMG53G19A-UUT?
Cortex-M4