首頁› 產品分類›Motor Drivers & Motion Controllers Modules
如果您有任何採購需求,我們可透過 RS Components、Digi-Key Electronics、element14、Arrow Electronics、Avnet、Future Electronics、Chip1Stop、Transfer Multisort Elektronik、Verical、Newark 等平台,為您爭取更优质的服務與價格。歡迎與我司銷售經理聯絡:、

Motor Drivers & Motion Controllers Modules

22 個型號
Analog Devices TMCC160-LC
The TMCC160-LC is a BLDC/PMSM servo controller - MotionCookie for laboratory automation, 3D-Printing, scanners and other automated equipment applications. The device provides an encoder interface, hall sensor support and field oriented control. The T
lastTimeShip
Analog Devices TMCM-1140-CABLE
The TMCM-1140 is a single axis stepper motor controller/driver module for sensorless load dependent current control. The device is powered by ADI Trinamic StallGuard2, CoolStep and SpreadCycle chopper technology and has a trapezoidal ramp generator.
production
Analog Devices TMCM-1160-CABLE
The TMCM-1160 is a single axis stepper motor controller/driver module for sensorless load dependent current control. The device is powered by ADI Trinamic StallGuard2, CoolStep and SpreadCycle chopper technology and has a trapezoidal ramp generator.
production
Analog Devices TMCM-1180-CABLE
The TMCM-1180 is a single axis stepper motor controller/driver module for sensorless load dependent current control. The device is powered by ADI Trinamic StallGuard2, CoolStep and SpreadCycle chopper technology and has a trapezoidal ramp generator.
production
Analog Devices TMCM-1240-CABLE
TMCM-1240 is a single axis motor controller/driver board for 2-phase bipolar stepper motors. It supports SixPoint ramps in addition to linear ramps. TMCM-1240 is capable of driving up to 2A RMS motor current and is designed for an operating voltage o
production
Analog Devices TMCM-1241-CABLE
The TMCM-1241 is a single axis motor controller/driver board for 2-phase bipolar stepper motors with up-to 3A RMS (4.3A peak) motor coil current. It supports linear ramps and unique SixPoint ramps. It offers on-board SensOstep encoder and in addition
production
Analog Devices TMCM-1260-CABLE
The TMCM-1260 is a single axis motor controller/driver board for 2-phase bipolar stepper motors with up-to 6A RMS motor current and 48V DC supply. It supports SixPoint ramps in addition to linear ramps. All you need to get started is a power supply a
production
Analog Devices TMCM-1270-CABLE
The TMCM-1270 is a single axis stepper motor controller/driver module for sensorless load dependent current control. The device is powered by ADI Trinamic stallGuard2, coolStep, spreadCycle chopper and stealthChop technology and has a sixPoint ramp g
production
Analog Devices TMCM-1276-CABLE
TMCM-1276 is an easy to use smart stepper motor driver module. The module is controlled via a CAN bus interface and comes with two firmware options TMCL and CANopen. TMCM-1276 features StealthChop for absolute silent motor control, SpreadCycle for hi
production
Analog Devices TMCM-1278-CABLE
TMCM-1278 is an easy-to-use, high-power, single axis smart stepper motor driver module. The module with special housing enclosure is primarily designed for NEMA23/24 size stepper motors. This product is controlled and configured via a CAN bus interfa
production
Analog Devices TMCM-1617-BB
The TMCM-1617 is a low-weight miniaturized single axis servo driver for 3-phase BLDC motors with up to 18A RMS motor current and +24V supply. With CAN, RS485, and EtherCAT it offers various communication options. TMCM-1617 supports incremental encoder
lastTimeShip
Analog Devices TMCM-1630-4U
The TMCM-1630 is a compact single axis controller/ driver module for brushless DC motor applications. The device can deliver up-to 14A peak per motor phase (with proper heatsinking) and a continuous output power of 150 to 300W. The TMCM-1630 is made
已停产
Analog Devices TMCM-1636-CABLE
The TMCM-1636 is a single axis servo drive for 3-phase BLDC motors and DC motors with up to ca. 1000W running at +24V or +48V. It offers a CAN UART interface with either TMCL or CANopen protocol for communication. TMCM-1636 supports various positions
lastTimeShip
Analog Devices TMCM-1690-CAN-T
The TMCM-1690 is a single axis FOC servo controller gate driver module for 3-phase BLDC and DC motors with up to 1.5A gate drive current and +60V (+48 V nominal) supply. It offers UART (RS232), CAN, and EtherCAT® interfaces with TMCL, CANopen, or CAN
production
Analog Devices TMCM-1690-CANOPEN
The TMCM-1690 is a single axis FOC servo controller gate driver module for 3-phase BLDC and DC motors with up to 1.5A gate drive current and +60V (+48 V nominal) supply. It offers UART (RS232), CAN, and EtherCAT® interfaces with TMCL, CANopen, or CAN
production
Analog Devices TMCM-1690-COE
The TMCM-1690 is a single axis FOC servo controller gate driver module for 3-phase BLDC and DC motors with up to 1.5A gate drive current and +60V (+48 V nominal) supply. It offers UART (RS232), CAN, and EtherCAT® interfaces with TMCL, CANopen, or CAN
production
Analog Devices TMCM-1690-COE-T
The TMCM-1690 is a single axis FOC servo controller gate driver module for 3-phase BLDC and DC motors with up to 1.5A gate drive current and +60V (+48 V nominal) supply. It offers UART (RS232), CAN, and EtherCAT® interfaces with TMCL, CANopen, or CAN
production
Analog Devices TMCM-1690-TMCL
The TMCM-1690 is a single axis FOC servo controller gate driver module for 3-phase BLDC and DC motors with up to 1.5A gate drive current and +60V (+48 V nominal) supply. It offers UART (RS232), CAN, and EtherCAT® interfaces with TMCL, CANopen, or CAN
production
Analog Devices TMCM-1690-TMCL-T
The TMCM-1690 is a single axis FOC servo controller gate driver module for 3-phase BLDC and DC motors with up to 1.5A gate drive current and +60V (+48 V nominal) supply. It offers UART (RS232), CAN, and EtherCAT® interfaces with TMCL, CANopen, or CAN
production
Analog Devices TMCM-2611-AGV
The TMCM-2611-AGV is a dual axis servo drive platform for 3-phase BLDC motors running with up to 14ARMS at +48V. It offers RS485, CAN, and USB interfaces with TMCL™ protocol for communication. TMCM-2611-AGV supports various positions feedback options
production
Analog Devices TMCM-3110-CABLE
The TMCM-3110 is a triple axis stepper motor controller/driver module for sensorless load dependent current control. The device is powered by ADI Trinamic StallGuard2, CoolStep and SpreadCycle technology and has a trapezoidal ramp generator. The TMCM
production
Analog Devices TMCM-6214-CABLE
The TMCM-6214 is a 6-axes motor controller/driver board for 2-phase bipolar stepper motors with up-to 2A RMS motor current and+24Vnom.supply. The motion controllers support SixPoint ramps in addition to linear ramps in hardware. Three encoder inputs
production