首頁› 產品分類›DC/DC switching regulators
如果您有任何採購需求,我們可透過 RS Components、Digi-Key Electronics、element14、Arrow Electronics、Avnet、Future Electronics、Chip1Stop、Transfer Multisort Elektronik、Verical、Newark 等平台,為您爭取更优质的服務與價格。歡迎與我司銷售經理聯絡:、

DC/DC switching regulators

5 個型號
TI 5962R2320801PYE
The TPS7H4104 and TPS7H4102 are 7V, 3A per channel, multichannel, peak-current mode, synchronous buck converters optimized for use in area sensitive, space environment applications. The device incorporates four (TPS7H4104) or two (TPS7H4102) identical channels that can be use to step down the power input voltage into independent voltages up to 3A per phase or interleaved to increment the output current up to 12A (TPS7H4104) or 6A (TPS7H4102). Each channel incorporates the high-side and low-side power MOSFETs with programmable soft-start and slope compensation. Additionally, per channel power-good flags and enable signals are provided. The TPS7H4104 also includes an EN_SEQ input that enables a sequential power‑up and a reverse‑sequence power‑down. Various current limit mechanisms are included for robust current limiting during fault conditions. Thermal shutdown disables the device when the die temperature exceeds thermal limit. The TPS7H4104 and TPS7H4102 are 7V, 3A per channel, multich
在产
TI LM851772QRHARQ1
适用于 USB-PD 且具有 I²C 接口的汽车级 80V 四开关降压/升压控制器
在产
TI PTPS7H1302HBL/EM
The TPS7H1301 and TPS7H1302 are charge pump positive-to-negative voltage inverters with an integrated negative low dropout regulator (LDO). Both devices accept a positive input supply voltage range of 3V to 6.3V and deliver up to 400mA of output current, with integrated enable and power-good functionality. The TPS7H1301 features a 500kHz (typical) charge pump switching frequency and provides adjustable output voltage regulation. Its STAB pin enables direct access to the negative LDO error amplifier for external compensation, offering design flexibility for optimized transient response. The TPS7H1302 delivers a fixed –1.8V output voltage with a 1MHz (typical) charge pump switching frequency. By eliminating the need for external feedback resistors, the TPS7H1302 reduces both external component count and overall solution size. The TPS7H1301 and TPS7H1302 are charge pump positive-to-negative voltage inverters with an integrated negative low dropout regulator (LDO). Both devices accept a po
在产
TI PTPS7H5101DBTTSEPA
The TPS7H5101 is a dual phase D-CAP+ buck controller. The controller is optimized for high current, point of load power delivery due to the advanced control features of the D-CAP+ architecture which support a fast transient response with low output capacitance and high efficiency. The output capacitance can further be minimized through both the use of droop regulation and by utilizing the configurable undershoot reduction (USR) feature. Single or dual phase operation is possible with a single controller, thereby enabling power stage optimization for different current levels. Multiple configuration options are possible with this controller. PMBus provides the option to enable or disable the controller along with dynamically change the output voltage ±10% (voltage margining). Additional features include differential remote sensing for accurate voltage regulation and configurable compensation for an optimized control loop. The TPS7H5101 is a dual phase D-CAP+ buck controller. The controll
在产
TI TPS62810RWYR
The TPS6281x is family of pin-to-pin 1A, 2A, 3A, and 4A synchronous step-down DC/DC converters. All devices offer high efficiency and ease of use. The TPS6281x family is based on a peak current mode control topology. The TPS6281x is designed for industrial as well as telecommunication applications. Low resistive switches allow up to 4A continuous output current at high ambient temperature. The switching frequency is externally adjustable from 1.8MHz to 4MHz and can also be synchronized to an external clock in the same frequency range. In PWM/PFM mode, the TPS6281x automatically enter power save mode at light loads to maintain high efficiency across the whole load range. The TPS6281x provide 1% output voltage accuracy in PWM mode which helps design a power supply with high output voltage accuracy. The SS/TR pin allows setting the start-up time or forming tracking of the output voltage to an external source. This feature allows external sequencing of different supply rails and limiting t
在产