LE87100NQCT
The Le87100 device is a single-channel differential amplifier designed to drive PLC high-power signals. The Le87100 device contains a pair of wide-band amplifiers designed with Microchip’s HV15 bipolar SOI process for high-power output with low-power consumption. Line driver gain is set externally to the device. The device can be powered from a single high-voltage supply or from dual supplies. The device can be programmed to one of three preset bias levels to optimize power and performance. In addition, the line driver features a power down state, which forces low-power and high-impedance mode for receive transmissions or for idle operations. The control pins respond to input levels that can be generated with a standard GPIO, but are tolerant of higher voltage logic levels. The Le87100 device is available in a 16-pin (4 mm x 4 mm) QFN package with an exposed pad for enhanced thermal conductivity.
Microchip
Hết hàng
Không khuyến nghị cho thiết kế mới
ALL Line Drivers
Giao diện đường dây & viễn thông
Tài liệu chính thức
Tài liệu chính thứcThông số kỹ thuật
| Thông số | Giá trị |
|---|---|
| Status | Not Recommended for new designs |
| Application | PLC, G.HN, HPAV 2.0 |
| Ports | 1 |
| Loop Length | Short |
| Series | PLC |
Giá và bao bì
| Thông số | Giá trị |
|---|---|
| Giá đơn vị | ¥10.42 / 1ku |
| Giá theo số lượng | 1-24:14.93 25-99:12.57 100-999:11.5 1000-4999:10.42 5000-999999:9.82 |
| Loại bao bì | VQFN |
| Số chân | 16 |
| Phương thức đóng gói | LARGE T&R |
| Nhiệt độ hoạt động | -40 ~ 85 °C |