Accueil› Série LE87100›LE87100NQCT
Pour vos besoins en approvisionnement, nous pouvons vous proposer un service et des prix améliorés via RS Components, Digi-Key Electronics, element14, Arrow Electronics, Avnet, Future Electronics, Chip1Stop, Transfer Multisort Elektronik, Verical et Newark. Contactez notre responsable commercial : ,

LE87100NQCT

The Le87100 device is a single-channel differential amplifier designed to drive PLC high-power signals. The Le87100 device contains a pair of wide-band amplifiers designed with Microchip’s HV15 bipolar SOI process for high-power output with low-power consumption. Line driver gain is set externally to the device. The device can be powered from a single high-voltage supply or from dual supplies. The device can be programmed to one of three preset bias levels to optimize power and performance. In addition, the line driver features a power down state, which forces low-power and high-impedance mode for receive transmissions or for idle operations. The control pins respond to input levels that can be generated with a standard GPIO, but are tolerant of higher voltage logic levels. The Le87100 device is available in a 16-pin (4 mm x 4 mm) QFN package with an exposed pad for enhanced thermal conductivity.
Microchip Rupture de stock Déconseillé pour nouvelles conceptions ALL Line Drivers Interface ligne et télécom
Documents officiels Documents officiels

Spécifications techniques

LE87100NQCT — Spécifications techniques
ParamètreValeur
StatusNot Recommended for new designs
ApplicationPLC, G.HN, HPAV 2.0
Ports1
Loop LengthShort
SeriesPLC

Prix et conditionnement

LE87100NQCT — Microchip
ParamètreValeur
Prix unitaire¥10.42 / 1ku
Prix dégressif1-24:14.93 25-99:12.57 100-999:11.5 1000-4999:10.42 5000-999999:9.82
Type de conditionnementVQFN
Broches16
SupportLARGE T&R
Plage de température-40 ~ 85 °C

Autres boîtiers de cette série