Home›Serie LM851772-Q1
Per le vostre esigenze di acquisto, possiamo offrirvi un servizio e prezzi migliori tramite RS Components, Digi-Key Electronics, element14, Arrow Electronics, Avnet, Future Electronics, Chip1Stop, Transfer Multisort Elektronik, Verical e Newark. Parlate con il nostro responsabile commerciale: Taurus@Raysen.hk, Sehat@Raysen.hk
Serie LM851772-Q1
The LM851772-Q1 is a four-switch buck-boost controller. The device provides a regulated output voltage if the input voltage is higher, equal, or lower than the adjusted output voltage. In power save mode, the device supports very high efficiency over the complete operation range of the output. The output voltage and average current is dynamically programmable using the integrated I2C interface. The configuration range for output voltage and average current meets the USB-PD standard requirements. The integrated DRV1 pin is used to control an optional disconnect FET if the system is targeted to support dual role port (DRP) requirements. LM851772-Q1 runs at a fixed switching frequency, which is set using the RT/SYNC pin. The switching frequency remains the same during buck, boost, and buck-boost operation. The device maintains small mode transition ripple over all operating modes. The LM851772-Q1 is a four-switch buck-boost controller. The device provides a regulated output voltage if the
Controller DC/DC
2 componenti
TI
XLM851772QRHARQ1
Controller buck-boost a quattro switch per il settore automobilistico, da 80 V con interfaccia I²C per USB-PD
Disponibile
TI
LM851772QRHARQ1
The LM851772-Q1 is a four-switch buck-boost controller. The device provides a regulated output voltage if the input voltage is higher, equal, or lower than the adjusted output voltage. In power save mode, the device supports very high efficiency over the complete operation range of the output. The output voltage and average current is dynamically programmable using the integrated I2C interface. The configuration range for output voltage and average current meets the USB-PD standard requirements. The integrated DRV1 pin is used to control an optional disconnect FET if the system is targeted to support dual role port (DRP) requirements. LM851772-Q1 runs at a fixed switching frequency, which is set using the RT/SYNC pin. The switching frequency remains the same during buck, boost, and buck-boost operation. The device maintains small mode transition ripple over all operating modes. The LM851772-Q1 is a four-switch buck-boost controller. The device provides a regulated output voltage if the
Non disponibile