الرئيسية›سلسلة LM851772-Q1
في حال وجود طلبات شراء، يمكننا تزويدكم بخدمات وأسعار أفضل عبر المنصات: RS Components، Digi-Key Electronics، element14، Arrow Electronics، Avnet، Future Electronics، Chip1Stop، Transfer Multisort Elektronik، Verical و Newark. نرجو التواصل مع مدير المبيعات لدينا: ،

سلسلة LM851772-Q1

The LM851772-Q1 is a four-switch buck-boost controller. The device provides a regulated output voltage if the input voltage is higher, equal, or lower than the adjusted output voltage. In power save mode, the device supports very high efficiency over the complete operation range of the output. The output voltage and average current is dynamically programmable using the integrated I2C interface. The configuration range for output voltage and average current meets the USB-PD standard requirements. The integrated DRV1 pin is used to control an optional disconnect FET if the system is targeted to support dual role port (DRP) requirements. LM851772-Q1 runs at a fixed switching frequency, which is set using the RT/SYNC pin. The switching frequency remains the same during buck, boost, and buck-boost operation. The device maintains small mode transition ripple over all operating modes. The LM851772-Q1 is a four-switch buck-boost controller. The device provides a regulated output voltage if the
متحكمات تيار مستمر/تيار مستمر 2 قطعة
TI XLM851772QRHARQ1
وحدة تحكم معززة للكهرباء بأربعة مفاتيح بقدرة 80 فولت مع واجهة I²C لـ USB-PD
متوفر
TI LM851772QRHARQ1
The LM851772-Q1 is a four-switch buck-boost controller. The device provides a regulated output voltage if the input voltage is higher, equal, or lower than the adjusted output voltage. In power save mode, the device supports very high efficiency over the complete operation range of the output. The output voltage and average current is dynamically programmable using the integrated I2C interface. The configuration range for output voltage and average current meets the USB-PD standard requirements. The integrated DRV1 pin is used to control an optional disconnect FET if the system is targeted to support dual role port (DRP) requirements. LM851772-Q1 runs at a fixed switching frequency, which is set using the RT/SYNC pin. The switching frequency remains the same during buck, boost, and buck-boost operation. The device maintains small mode transition ripple over all operating modes. The LM851772-Q1 is a four-switch buck-boost controller. The device provides a regulated output voltage if the
غير متوفر