Ana sayfa›TCA9846 Serisi
Satın alma ihtiyaçlarınız için RS Components, Digi-Key Electronics, element14, Arrow Electronics, Avnet, Future Electronics, Chip1Stop, Transfer Multisort Elektronik, Verical ve Newark üzerinden daha iyi hizmet ve fiyatlar sunabiliriz. Satış ekibimize yazmanız yeterli: ,

TCA9846 Serisi

The TCA9846 is a quad bidirectional translating switch controlled via the I2C bus. The SCL/SDA upstream pair fans out to four downstream pairs, or channels. Any individual SCn/SDn channel or combination of channels can be selected, determined by the contents of the programmable control register. An active-low reset (RESET) input allows the TCA9846 to recover from a situation in which one of the downstream I2C buses is stuck in a low state. Pulling RESET low resets the I2C state machine and causes all the channels to be deselected, as does the internal power-on reset function. The pass gates of the switches are constructed so that VDD1/VDD2 pins can be used to limit the maximum high voltage, which is passed by the TCA9846. Limiting the maximum high voltage allows the use of different bus voltages on each pair, so that 0.65V, 0.8V, 1.2V, or 1.8V parts can communicate with 3.3V parts, without any additional protection. External pullup resistors pull the bus up to the desired voltage level
I2C ve I3C anahtarlar ve çoklayıcılar 2 parça
TI PTCA9846PWR
Sıfırlamalı Çok Düşük Gerilim 1MHz 4 Kanallı I2C Değiştirici
Stokta var
TI TCA9846PWR
The TCA9846 is a quad bidirectional translating switch controlled via the I2C bus. The SCL/SDA upstream pair fans out to four downstream pairs, or channels. Any individual SCn/SDn channel or combination of channels can be selected, determined by the contents of the programmable control register. An active-low reset (RESET) input allows the TCA9846 to recover from a situation in which one of the downstream I2C buses is stuck in a low state. Pulling RESET low resets the I2C state machine and causes all the channels to be deselected, as does the internal power-on reset function. The pass gates of the switches are constructed so that VDD1/VDD2 pins can be used to limit the maximum high voltage, which is passed by the TCA9846. Limiting the maximum high voltage allows the use of different bus voltages on each pair, so that 0.65V, 0.8V, 1.2V, or 1.8V parts can communicate with 3.3V parts, without any additional protection. External pullup resistors pull the bus up to the desired voltage level
Stokta yok