LE87100NQC
The Le87100 device is a single-channel differential amplifier designed to drive PLC high-power signals. The Le87100 device contains a pair of wide-band amplifiers designed with Microchip’s HV15 bipolar SOI process for high-power output with low-power consumption. Line driver gain is set externally to the device. The device can be powered from a single high-voltage supply or from dual supplies. The device can be programmed to one of three preset bias levels to optimize power and performance. In addition, the line driver features a power down state, which forces low-power and high-impedance mode for receive transmissions or for idle operations. The control pins respond to input levels that can be generated with a standard GPIO, but are tolerant of higher voltage logic levels. The Le87100 device is available in a 16-pin (4 mm x 4 mm) QFN package with an exposed pad for enhanced thermal conductivity.
Microchip
Нет в наличии
Не рекомендуется для новых разработок
ALL Line Drivers
Линейный и телекоммуникационный интерфейс
Официальные документы
Официальные документыТехнические характеристики
| Параметр | Значение |
|---|---|
| Status | Not Recommended for new designs |
| Application | PLC, G.HN, HPAV 2.0 |
| Ports | 1 |
| Loop Length | Short |
| Series | PLC |
Цена и корпус
| Параметр | Значение |
|---|---|
| Цена за шт. | ¥9.15 / 1ku |
| Цена по объёму | 1-24:13.18 25-99:10.89 100-999:10.02 1000-4999:9.15 5000-999999:8.74 |
| Тип корпуса | VQFN |
| Выводов | 16 |
| Носитель | TRAY |
| Рабочая температура | -40 ~ 85 °C |