ATSAM4N8AA-MU
Microchip's ATSAM4N8A ARM® Cortex®-M4-based microcontroller runs at 100MHz and features 512KB of flash memory and 64KB of SRAM. Peripherals include five USARTs, two SPIs and three I 2 Cs for fast serial communication, as well as an 8-channel 12-bit ADC, PWM, timers and RTC. The device operates from
Microchip
Sem estoque
Ativo
32-bit Microcontroller
Microcontroladores (MCU) e processadores
Documentos oficiais
Documentos oficiaisEspecificações técnicas
| Parâmetro | Valor |
|---|---|
| Status | In Production |
| Packages | 48\LQFP,48\VQFN |
| SPI | 2 |
| I2C | 3 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 10 |
| ADC Channels | 8 |
| Pincount | 48 |
| Program Memory size (KB) | 512 |
| Number of Comparators | 0 |
| Part Family | ATSAM4N8A |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.6 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 0 |
| DAC Resolution (Bits) | 0 |
| I/O Pins Max | 34 |
| Number of DACs | 0 |
| CPU Speed (MIPS/DMIPS) | 100 |
| CPU | Cortex-M4 |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 0 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 16 |
| LIN | No |
| DAC Outputs | 0 |
| Number of Op Amps | 0 |
| Watch Dog Timer | No |
| IrDA | Yes |
| Vbat/Vddbu battery backup | No |
| Arquitetura | 32 |
| CRC | No |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 64 |
| 16-Bit Digital Timers | 6 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 4 |
| U(S)ART | 5 -UART |
| RAM Bytes | 65536 |
| Parallel Port | No |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 500 |
| Direct Memory Access (DMA) Channels | 23 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 3 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 0 |
| Low Power | No |
| CPU Speed Max MHz (megahertz) | 100 |
| Multiple output CCP (MCCP) | 0 |
| Input Capture | 12 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Auxiliary Flash (KB) | 0 |
| PWM Resolution (ns) | 0 |
| Comparator max speed (ns) | 0 |
| Data EEPROM (bytes) | 0 |
| QSPI | 0 |
| External Memory Bus Interface | No |
| FPU | No |
| SDIO/SD-CARD/eMMC | 0 |
| Part Prefix | SAM4 |
| Ext. DRAM Interface | No |
| USB | None |
| Code-Guard Security | None |
| Type of CAN module | None |
| Ethernet | None |
Preço e embalagem
| Parâmetro | Valor |
|---|---|
| Preço unitário | ¥24.34 / 1ku |
| Preço por volume | 1-24:32.41 25-99:29.45 100-999:26.7 1000-4999:24.34 5000-999999:23.4 |
| Tipo de embalagem | VQFN |
| Pinos | 48 |
| Embalagem | TRAY |
| Faixa de temperatura | -40 ~ 85 °C |
Perguntas frequentes
ATSAM4N8AA-MU está em estoque?
ATSAM4N8AA-MU está sem estoque no momento; considere alternativas ou solicite cotação.
ATSAM4N8AA-MU está obsoleto (EOL)?
Não, ATSAM4N8AA-MU não está obsoleto; está em produção ativa e disponível para compra.
Qual pacote o ATSAM4N8AA-MU usa?
48\LQFP,48\VQFN
Quantos pinos o ATSAM4N8AA-MU tem?
48
Qual é a faixa de tensão de alimentação de ATSAM4N8AA-MU?
1.62 – 3.6
Em qual faixa de temperatura o ATSAM4N8AA-MU opera?
-40 °C – 85 °C
A qual arquitetura ou família o ATSAM4N8AA-MU pertence?
Cortex-M4