ATSAM3X4CA-CU
Based on the ARM® Cortex®-M3 processor, the Microchip's SAM3X4C runs at 84MHz and features 256KB of flash memory in 2 x 128KB banks and 64KB of SRAM in 2 x 32KB banks. Its highly-integrated peripheral set includes Ethernet, dual CAN, High Speed USB MiniHost and device with on-chip PHY, high-speed SD
Microchip
Sem estoque
Ativo
32-bit Microcontroller
Microcontroladores (MCU) e processadores
Documentos oficiais
Documentos oficiaisEspecificações técnicas
| Parâmetro | Valor |
|---|---|
| Status | In Production |
| Packages | 100\LQFP,100\TFBGA |
| SPI | 4 |
| I2C | 2 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 12 |
| ADC Channels | 16 |
| Pincount | 100 |
| Program Memory size (KB) | 256 |
| Number of Comparators | 0 |
| Part Family | ATSAM3X4C |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.6 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 2 |
| Number of USB Modules | 1 |
| DAC Resolution (Bits) | 12 |
| I/O Pins Max | 63 |
| Number of DACs | 1 |
| CPU Speed (MIPS/DMIPS) | 84 |
| CPU | Cortex-M3 |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 2 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 0 |
| LIN | Yes |
| DAC Outputs | 2 |
| Number of Op Amps | 0 |
| Watch Dog Timer | No |
| IrDA | Yes |
| Vbat/Vddbu battery backup | No |
| Arquitetura | 32 |
| CRC | No |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 64 |
| 16-Bit Digital Timers | 0 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 4 |
| U(S)ART | 4 -UART |
| RAM Bytes | 65536 |
| Parallel Port | No |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 1000 |
| Direct Memory Access (DMA) Channels | 21 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 9 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 1 |
| Low Power | No |
| CPU Speed Max MHz (megahertz) | 84 |
| Multiple output CCP (MCCP) | 0 |
| ADC Modules | 1 |
| Input Capture | 6 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Internal Voltage Reference (Bandgap) | Yes |
| Auxiliary Flash (KB) | 0 |
| PWM Resolution (ns) | 0 |
| 8-Bit Digital Timers | 0 x 8-bit |
| Comparator max speed (ns) | 0 |
| Data EEPROM (bytes) | 0 |
| QSPI | 0 |
| External Memory Bus Interface | No |
| FPU | No |
| SDIO/SD-CARD/eMMC | 1 |
| Part Prefix | SAM3 |
| Ext. DRAM Interface | No |
| USB | High Speed |
| Number of Ethernet Ports | No |
| Code-Guard Security | None |
| Type of CAN module | None |
| Ethernet | 10/100 Base-TX Mac |
Preço e embalagem
| Parâmetro | Valor |
|---|---|
| Preço unitário | ¥60.32 / 1ku |
| Preço por volume | 1-24:80.16 25-99:72.83 100-999:65.97 1000-4999:60.32 5000-999999:57.9 |
| Tipo de embalagem | TFBGA |
| Pinos | 100 |
| Embalagem | TRAY |
| Faixa de temperatura | -40 ~ 85 °C |
Perguntas frequentes
ATSAM3X4CA-CU está em estoque?
ATSAM3X4CA-CU está sem estoque no momento; considere alternativas ou solicite cotação.
ATSAM3X4CA-CU está obsoleto (EOL)?
Não, ATSAM3X4CA-CU não está obsoleto; está em produção ativa e disponível para compra.
Qual pacote o ATSAM3X4CA-CU usa?
100\LQFP,100\TFBGA
Quantos pinos o ATSAM3X4CA-CU tem?
100
Qual é a faixa de tensão de alimentação de ATSAM3X4CA-CU?
1.62 – 3.6
Em qual faixa de temperatura o ATSAM3X4CA-CU opera?
-40 °C – 85 °C
A qual arquitetura ou família o ATSAM3X4CA-CU pertence?
Cortex-M3