ADIS16485
战术级6自由度MEMS惯性传感器
Analog Devices
재고 없음
활성
Inertial Measurement Units
센서
공식 문서
공식 문서기술 사양
| 파라미터 | 값 |
|---|---|
| Accel Axis To Axis Alignment Typ | 0.035 ° |
| Gyro Axis To Axis Alignment Typ | 0.05 ° |
| Positive Supply Voltage Max | 3.6 V |
| Gyro In Run Bias Stability Typ | 6.25 °/hr |
| Output Signal Type | Digital Signal |
| Gyro Noise Density Typ | 0.0066 °/s/√Hz |
| Full Scale Range Sec | 450 °/s |
| Inertial Sensor Type | Accelerometer, Gyroscope |
| Accel Output Total Noise Typ | 1.25 mg |
| Accel Velocity Random Walk Typ | 0.023 m/s/rthr |
| Accelerometer Noise Density Typ | 55 µg/√Hz |
| Gyro Output Total Noise Typ | 0.16 °/s |
| Gyro Nonlinearity Typ | 0.01 % FSR |
| Customer Built Product | Access Control & Occupancy Monitors|Robots & Cobots|Navigation Systems |
| Gyro Angular Random Walk Typ | 0.3 °/rthr |
| Gyro Linear G Typ | 0.009 °/s/g |
| Accel Bias Repeatability Typ | 0.003 g |
| Gyro Bias Repeatability Typ | 0.2 °/s |
| Full Scale Range G | ±5 g |
| Accel In Run Bias Stability Typ | 32 µg |
| Gyro Bias Error Over Temp Typ | 0.0025 °/s/°C |
| Accelerometer Nonlinearity Typ | 0.1 % FSR |
| Gyro Bandwidth Typ | 330 Hz |
| Output Sample Rate | 2.46 ksps |
| integrated technology | Temperature Sensor |
| Positive Supply Voltage Min | 3 V |
| Sensor Feature | Embedded Connector |
| Number of Axes | 6 |
| Accel Sens Error Over Temp Typ | 10 ppm/°C |
| Interface Signal | SPI |
| Package Code | ML-24-6 |
| Package | 4-Lead Module with Connector Interface (44mm x 42.6mm x 14mm w/EP) |
| Terminal Finish | E4 |
| Product Description | Tactical Grade Six Degrees of Freedom MEMS Inertial Sensor |
| Temp Range | -40 to 105°C |
| Web Launch Date | 2012-04-04 |
| Accelerometer Axis to Axis Alignment typ | 0.035 ° |
| Gyro Axis To Axis Alignment Typ | 0.05 ° |
| Positive Supply Voltage Max | 3.6 V |
| Gyro In Run Bias Stability Typ | 6.25 °/hr |
| Gyro Noise Density Typ | 0.0066 °/s/√Hz |
| Gyro Full Scale Range | 450 °/s |
| Accelerometer Output Total Noise typ | 1.25 mg |
| Accelerometer Velocity Random Walk typ | 0.023 m/s/rthr |
| Accelerometer Noise Density Typ | 55 µg/√Hz |
| Gyro Output Total Noise Typ | 0.16 °/s |
| Gyro Nonlinearity Typ | 0.01 % FSR |
| Customer Built Application | Access Control & Occupancy Monitors|Robots & Cobots|Navigation Systems |
| Gyro Angular Random Walk Typ | 0.3 °/rthr |
| Gyro Linear G Typ | 0.009 °/s/g |
| Accelerometer Bias Repeatability typ | 0.003 g |
| Gyro Bias Repeatability Typ | 0.2 °/s |
| Accelerometer Full Scale Range | ±5 g |
| Accelerometer In Run Bias Stability typ | 32 µg |
| Gyro Bias Error Over Temp Typ | 0.0025 °/s/°C |
| Accelerometer Nonlinearity Typ | 0.1 % FSR |
| Gyro Bandwidth Typ | 330 Hz |
| Positive Supply Voltage Min | 3 V |
| Number of Axes | 6 |
| Accelerometer Sensitivity Error Over Temp typ | 10 ppm/°C |
| Interface Protocol | SPI |
| 패키지 면적 | 2068mm² (4-Lead Module with Connector Interface (44mm x 42.6mm x 14mm w/EP)) (ADIS16485BMLZ) |
| Package Height | 14mm (4-Lead Module with Connector Interface (44mm x 42.6mm x 14mm w/EP)) (ADIS16485BMLZ) |
| Temperature Range | -40 to 105°C |
| Lifecycle | Recommended For New Designs |
| Launch Date | 2012-04-04 |
가격 및 패키지
| 파라미터 | 값 |
|---|---|
| 패키지 유형 | 4-Lead Module with Connector Interface (44mm x 42.6mm x 14mm w/EP) |
| 핀 수 | 4 |
| 작동 온도 범위 | -40 ~ 105 °C |
자주 묻는 질문
ADIS16485은(는) 재고가 있나요?
ADIS16485은(는) 현재 재고가 없으므로 대체 부품 검토 또는 견적 요청을 권장합니다.
ADIS16485은(는) 단종(EOL)되었나요?
아니오, 단종되지 않았습니다. ADIS16485은(는) 현재 양산 중이며 정상 구매 가능합니다.
ADIS16485은(는) 어떤 패키지를 사용하나요?
4-Lead Module with Connector Interface (44mm x 42.6mm x 14mm w/EP)
ADIS16485의 공급전압 범위는?
3 V – 3.6 V
ADIS16485은(는) 어떤 온도 범위에서 동작하나요?
-40 to 105°C