ATSAMD21J18A-AF
SAMD21, 256KB Flash, 32KB RAM, General Purpose, ARM Cortex M0+, low power, 64-pin
Microchip
Disponibile
Attivo
32-bit Microcontroller
Microcontrollori (MCU) e processatori
Documenti ufficiali
Documenti ufficialiSpecifiche tecniche
| Parametro | Valore |
|---|---|
| Status | In Production |
| Packages | 64\QFN | 64\TQFP | 64\UFBGA | 64\VQFN |
| SPI | 6 |
| I2C | 6 |
| TempRange Max | 125 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 12 |
| ADC Channels | 20 |
| Pincount | 64 |
| Program Memory size (KB) | 256 |
| Number of Comparators | 2 |
| Part Family | SAMD21 |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.63 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 1 |
| DAC Resolution (Bits) | 10 |
| I/O Pins Max | 52 |
| Number of DACs | 1 |
| CPU Speed (MIPS/DMIPS) | 45 |
| CPU | Cortex-M0+ |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 0 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 16 |
| LIN | Yes |
| DAC Outputs | 1 |
| Number of Op Amps | 0 |
| Watch Dog Timer | Yes |
| IrDA | Yes |
| Vbat/Vddbu battery backup | No |
| Architettura | 32 |
| CRC | Yes |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 32 |
| 16-Bit Digital Timers | 5 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 24 |
| U(S)ART | 6 -UART |
| RAM Bytes | 32768 |
| Parallel Port | GPIO |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 14 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 350 |
| Direct Memory Access (DMA) Channels | 12 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 2 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 1 |
| Low Power | Yes |
| CPU Speed Max MHz (megahertz) | 48 |
| Multiple output CCP (MCCP) | 0 |
| ADC Modules | 1 |
| Input Capture | 8 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Internal Voltage Reference (Bandgap) | Yes |
| Auxiliary Flash (KB) | 0.064 |
| PWM Resolution (ns) | 0 |
| 5k Pricing | 2.79 |
| 8-Bit Digital Timers | 5 x 8-bit |
| Comparator max speed (ns) | 116 |
| Data EEPROM (bytes) | 0 |
| Brown-Out Reset | None |
| Family | 32-bit MCU |
| Stand alone PWM | 0 |
| Internal Oscillator | 32khz, 32Khz ULP, 8Mhz |
| Zero Cross Detect | No |
| Numerically Controlled Oscillator (NCO) | 0 |
| Hardware Limit Timer | No |
| Signal Measurement Timer | 0 |
| Enhanced Capture/Compare/PWM (ECCP) | 0 |
| Data Signal Modulator (DSM) | 0 |
| Bootload capable | Yes |
| Slope Compensation / Programmable Ramp Generator | No |
| Complementary Waveform Generator (CWG) / Complementary Output Generator (COG) Max dBc/Hz (decibels relative to carrier in a 1 Hz bandwidth) | 0 |
| QSPI | 0 |
| External Memory Bus Interface | No |
| Cap. Touch Channels | 256 |
| SMPS | 0 |
| FPU | No |
| SDIO/SD-CARD/eMMC | 0 |
| Standalone Output Compare/ Standard PWM | 10 |
| Part Prefix | SAMD |
| Ext. DRAM Interface | No |
| Low Voltage Detection | None |
| Configurable Logic Cell Modules (CLC /CCL) Type | CLC |
| Temp. Sensor | Yes |
| Timers | 8 |
| USB | Full Speed |
| Diff ADC Inputs | 20 |
| Number of Ethernet Ports | No |
| Debug Interface | SWD |
| ADC Sample/Hold | 1 |
| Camera Interface | No |
| Code-Guard Security | None |
| NAND Interface | No |
| Output Compare Channels | 18 |
| H/W Video Decoder | No |
| Number of Cores | 0.5 |
| Hardware Touch Peripheral | PTC |
| JTAG Max TB (terabyte) | Debug/Program |
| ARM Neon | No |
| Focus | No |
| Programmable Gain Amp (PGA) | 1 |
| ECC Program Flash (Error Correction Code) | No |
| CODEC Interface (I2S, AC97) | Yes |
| XLP | No |
| ARM Trust Zone | No |
| Type of CAN module | None |
| MMU | No |
| Supported in MPLAB Code Configurator | No |
| SQI | 0 |
| MSSP(SPI/I2C) | 0 |
| Ethernet | None |
| Automotive Qualified | 0 |
| Secure Key Storage | No |
| Secure Debug | No |
| Class D Amplifier Outputs | No |
| Random Number Generator | No |
| Hardware QTouch Acquisition | Yes |
| Chip-level Tamper Detection | No |
| RS-485 | No |
| Support LCCG | No |
Prezzo e imballaggio
| Parametro | Valore |
|---|---|
| Prezzo unitario | ¥24.34 / 1ku |
| Prezzo per quantità | 1-24:32.41 25-99:29.45 100-999:26.7 1000-4999:24.34 5000-999999:23.4 |
| Tipo di imballaggio | TQFP |
| Pin | 64 |
| Supporto | TRAY |
| Campo di temperatura | -40 ~ 125 °C |
Domande frequenti
ATSAMD21J18A-AF è disponibile?
ATSAMD21J18A-AF è attualmente disponibile e ordinabile online.
ATSAMD21J18A-AF è obsoleto (EOL)?
No, ATSAMD21J18A-AF non è obsoleto; è attualmente in produzione ed è acquistabile.
Quale package usa ATSAMD21J18A-AF?
64\QFN | 64\TQFP | 64\UFBGA | 64\VQFN
Quanti pin ha ATSAMD21J18A-AF?
64
Qual è il range di tensione di alimentazione di ATSAMD21J18A-AF?
1.62 – 3.63
In quale intervallo di temperatura opera ATSAMD21J18A-AF?
-40 °C – 125 °C
A quale architettura o famiglia appartiene ATSAMD21J18A-AF?
32-bit MCU
Altri package di questa serie
ATSAMD21J18A-AUATSAMD21J18A-AUTATSAMD21J18A-AZ510ATSAMD21J18A-AZTVAOATSAMD21J18A-AZVAOATSAMD21J18A-CUATSAMD21J18A-MFATSAMD21J18A-MFTATSAMD21J18A-MUATSAMD21J18A-MZATSAMD21J18A-AFTATSAMD21J18A-AU-SLLATSAMD21J18A-AZATSAMD21J18A-AZTATSAMD21J18A-AZT510ATSAMD21J18A-CUTATSAMD21J18A-MMFATSAMD21J18A-MMFTATSAMD21J18A-MMUATSAMD21J18A-MMU-SLLATSAMD21J18A-MMUTATSAMD21J18A-MMZATSAMD21J18A-MMZTATSAMD21J18A-MMZTVAO