ATSAM4N16BA-AU
Microchip's ATSAM4N16B ARM® Cortex®-M4-based microcontroller runs at 100MHz and features 1MB of flash memory and 80KB of SRAM. Peripherals include six USARTs, three SPIs and three I 2 Cs for fast serial communication, as well as a 10-channel 12-bit ADC, a 10-bit DAC, PWM, timers and RTC. The device
Microchip
Disponibile
Attivo
32-bit Microcontroller
Microcontrollori (MCU) e processatori
Documenti ufficiali
Documenti ufficialiSpecifiche tecniche
| Parametro | Valore |
|---|---|
| Status | In Production |
| Packages | 64\LQFP,64\VQFN |
| SPI | 3 |
| I2C | 3 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 10 |
| ADC Channels | 10 |
| Pincount | 64 |
| Program Memory size (KB) | 1024 |
| Number of Comparators | 0 |
| Part Family | ATSAM4N16B |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.6 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 0 |
| DAC Resolution (Bits) | 10 |
| I/O Pins Max | 47 |
| Number of DACs | 1 |
| CPU Speed (MIPS/DMIPS) | 100 |
| CPU | Cortex-M4 |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 1 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 16 |
| LIN | No |
| DAC Outputs | 1 |
| Number of Op Amps | 0 |
| Watch Dog Timer | No |
| IrDA | Yes |
| Vbat/Vddbu battery backup | No |
| Architettura | 32 |
| CRC | No |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 80 |
| 16-Bit Digital Timers | 6 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 4 |
| U(S)ART | 6 -UART |
| RAM Bytes | 81920 |
| Parallel Port | No |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 500 |
| Direct Memory Access (DMA) Channels | 23 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 3 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 0 |
| Low Power | No |
| CPU Speed Max MHz (megahertz) | 100 |
| Multiple output CCP (MCCP) | 0 |
| Input Capture | 12 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Auxiliary Flash (KB) | 0 |
| PWM Resolution (ns) | 0 |
| Comparator max speed (ns) | 0 |
| Data EEPROM (bytes) | 0 |
| QSPI | 0 |
| External Memory Bus Interface | No |
| FPU | No |
| SDIO/SD-CARD/eMMC | 0 |
| Part Prefix | SAM4 |
| Ext. DRAM Interface | No |
| USB | None |
| Code-Guard Security | None |
| Type of CAN module | None |
| Ethernet | None |
Prezzo e imballaggio
| Parametro | Valore |
|---|---|
| Prezzo unitario | ¥30.6 / 1ku |
| Prezzo per quantità | 1-24:40.62 25-99:36.92 100-999:33.42 1000-4999:30.6 5000-999999:29.32 |
| Tipo di imballaggio | LQFP |
| Pin | 64 |
| Supporto | TRAY |
| Campo di temperatura | -40 ~ 85 °C |
Domande frequenti
ATSAM4N16BA-AU è disponibile?
ATSAM4N16BA-AU è attualmente disponibile e ordinabile online.
ATSAM4N16BA-AU è obsoleto (EOL)?
No, ATSAM4N16BA-AU non è obsoleto; è attualmente in produzione ed è acquistabile.
Quale package usa ATSAM4N16BA-AU?
64\LQFP,64\VQFN
Quanti pin ha ATSAM4N16BA-AU?
64
Qual è il range di tensione di alimentazione di ATSAM4N16BA-AU?
1.62 – 3.6
In quale intervallo di temperatura opera ATSAM4N16BA-AU?
-40 °C – 85 °C
A quale architettura o famiglia appartiene ATSAM4N16BA-AU?
Cortex-M4