ATSAM3U4CA-CU
Microchip's ARM®-based SAM3U4C is a member of the SAM3U family of flash microcontrollers based on the high-performance 32-bit ARM Cortex®-M3 RISC processor. It operates at a maximum speed of 96MHz and features 2x128KB of dual-bank flash memory and 52KB of SRAM. The peripheral set includes a High Spe
Microchip
Non disponibile
Attivo
32-bit Microcontroller
Microcontrollori (MCU) e processatori
Documenti ufficiali
Documenti ufficialiSpecifiche tecniche
| Parametro | Valore |
|---|---|
| Status | In Production |
| Packages | 100\LQFP,100\TFBGA |
| SPI | 4 |
| I2C | 1 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 12 |
| ADC Channels | 8 |
| Pincount | 100 |
| Program Memory size (KB) | 256 |
| Number of Comparators | 0 |
| Part Family | ATSAM3U4C |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.6 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 1 |
| DAC Resolution (Bits) | 0 |
| I/O Pins Max | 57 |
| Number of DACs | 0 |
| CPU Speed (MIPS/DMIPS) | 120 |
| CPU | Cortex-M3 |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 1 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 0 |
| LIN | No |
| DAC Outputs | 0 |
| Number of Op Amps | 0 |
| Watch Dog Timer | No |
| IrDA | Yes |
| Vbat/Vddbu battery backup | No |
| Architettura | 32 |
| CRC | No |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 50 |
| 16-Bit Digital Timers | 3 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 4 |
| U(S)ART | 4 -UART |
| RAM Bytes | 51200 |
| Parallel Port | EBI |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 1000 |
| Direct Memory Access (DMA) Channels | 21 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 0 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 1 |
| Low Power | No |
| CPU Speed Max MHz (megahertz) | 96 |
| Multiple output CCP (MCCP) | 0 |
| ADC Modules | 2 |
| Input Capture | 6 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Internal Voltage Reference (Bandgap) | Yes |
| Auxiliary Flash (KB) | 0 |
| PWM Resolution (ns) | 0 |
| 8-Bit Digital Timers | 0 x 8-bit |
| Comparator max speed (ns) | 0 |
| Data EEPROM (bytes) | 0 |
| QSPI | 0 |
| External Memory Bus Interface | No |
| FPU | No |
| SDIO/SD-CARD/eMMC | 1 |
| Part Prefix | SAM3 |
| Ext. DRAM Interface | No |
| USB | High Speed |
| Code-Guard Security | None |
| Type of CAN module | None |
| Ethernet | None |
Prezzo e imballaggio
| Parametro | Valore |
|---|---|
| Prezzo unitario | ¥41.69 / 1ku |
| Prezzo per quantità | 1-24:55.21 25-99:50.3 100-999:45.59 1000-4999:41.69 5000-999999:39.88 |
| Tipo di imballaggio | TFBGA |
| Pin | 100 |
| Supporto | TRAY |
| Campo di temperatura | -40 ~ 85 °C |
Domande frequenti
ATSAM3U4CA-CU è disponibile?
ATSAM3U4CA-CU non è attualmente disponibile; valuti alternative o richieda un preventivo.
ATSAM3U4CA-CU è obsoleto (EOL)?
No, ATSAM3U4CA-CU non è obsoleto; è attualmente in produzione ed è acquistabile.
Quale package usa ATSAM3U4CA-CU?
100\LQFP,100\TFBGA
Quanti pin ha ATSAM3U4CA-CU?
100
Qual è il range di tensione di alimentazione di ATSAM3U4CA-CU?
1.62 – 3.6
In quale intervallo di temperatura opera ATSAM3U4CA-CU?
-40 °C – 85 °C
A quale architettura o famiglia appartiene ATSAM3U4CA-CU?
Cortex-M3