ATSAM3S2AA-MUR
The SAM3S2 is a member of the Microchip's SAM3S series microcontrollers based on the high-performance 32-bit ARM® Cortex®-M3 RISC processor. It operates at a maximum speed of 64MHz and features 128KB of flash memory and 32KB of SRAM. The extensive peripheral set includes a Full Speed USB device port
Microchip
Non disponibile
Attivo
32-bit Microcontroller
Microcontrollori (MCU) e processatori
Documenti ufficiali
Documenti ufficialiSpecifiche tecniche
| Parametro | Valore |
|---|---|
| Status | In Production |
| Packages | 48\LQFP,48\VQFN |
| SPI | 2 |
| I2C | 2 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 12 |
| ADC Channels | 8 |
| Pincount | 48 |
| Program Memory size (KB) | 128 |
| Number of Comparators | 1 |
| Part Family | ATSAM3S2A |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.6 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 1 |
| DAC Resolution (Bits) | 0 |
| I/O Pins Max | 34 |
| Number of DACs | 0 |
| CPU Speed (MIPS/DMIPS) | 80 |
| CPU | Cortex-M3 |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 1 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 0 |
| LIN | No |
| DAC Outputs | 0 |
| Number of Op Amps | 0 |
| Watch Dog Timer | No |
| IrDA | Yes |
| Vbat/Vddbu battery backup | No |
| Architettura | 32 |
| CRC | Yes |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 32 |
| 16-Bit Digital Timers | 6 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 4 |
| U(S)ART | 3 -UART |
| RAM Bytes | 32768 |
| Parallel Port | No |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 1000 |
| Direct Memory Access (DMA) Channels | 22 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 0 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 1 |
| Low Power | No |
| CPU Speed Max MHz (megahertz) | 64 |
| Multiple output CCP (MCCP) | 0 |
| ADC Modules | 1 |
| Input Capture | 6 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Internal Voltage Reference (Bandgap) | Yes |
| Auxiliary Flash (KB) | 0 |
| PWM Resolution (ns) | 0 |
| 8-Bit Digital Timers | 0 x 8-bit |
| Comparator max speed (ns) | 100 |
| Data EEPROM (bytes) | 0 |
| QSPI | 0 |
| External Memory Bus Interface | No |
| FPU | No |
| SDIO/SD-CARD/eMMC | 0 |
| Part Prefix | SAM3 |
| Ext. DRAM Interface | No |
| USB | Full Speed |
| Code-Guard Security | None |
| Type of CAN module | None |
| Ethernet | None |
Prezzo e imballaggio
| Parametro | Valore |
|---|---|
| Prezzo unitario | ¥27.3 / 1ku |
| Prezzo per quantità | 1-24:36.38 25-99:33.08 100-999:29.92 1000-4999:27.3 5000-999999:26.23 |
| Tipo di imballaggio | VQFN |
| Pin | 48 |
| Supporto | LARGE T&R |
| Campo di temperatura | -40 ~ 85 °C |
Domande frequenti
ATSAM3S2AA-MUR è disponibile?
ATSAM3S2AA-MUR non è attualmente disponibile; valuti alternative o richieda un preventivo.
ATSAM3S2AA-MUR è obsoleto (EOL)?
No, ATSAM3S2AA-MUR non è obsoleto; è attualmente in produzione ed è acquistabile.
Quale package usa ATSAM3S2AA-MUR?
48\LQFP,48\VQFN
Quanti pin ha ATSAM3S2AA-MUR?
48
Qual è il range di tensione di alimentazione di ATSAM3S2AA-MUR?
1.62 – 3.6
In quale intervallo di temperatura opera ATSAM3S2AA-MUR?
-40 °C – 85 °C
A quale architettura o famiglia appartiene ATSAM3S2AA-MUR?
Cortex-M3