ADP8861ACPZ-R7
电荷泵、7通道智能LED驱动器,采用I2C 接口
Analog Devices
Non disponibile
production
LED Drivers
Gestione dell'alimentazione
Documenti ufficiali
Documenti ufficialiSpecifiche tecniche
| Parametro | Valore |
|---|---|
| Led Driver Output Voltage | 5.5 V |
| Switching Frequency | 1300000 Hz |
| Led Driver Topology | Boost |
| Industry | Personal Electronics & Appliances |
| Output Current | 30 mA |
| Number Of Outputs | 7 |
| Interface Signal | I²C |
| Led Driver Type | Charge Pump LED Driver |
| Customer Built Product | Cellular Phones |
| Led Driver Switching Frequency | 1 MHz |
| protection type | Undervoltage Lockout |
| vin max | 5.5 V |
| power feature | Inductorless, Synchronous |
| vin min | 2.5 V |
| Package Code | CB-20-6, CP-20-8 |
| Package | 20-Ball WLCSP (1.955m x 2.355mm), 20-Lead LFCSP (4mm x 4mm w/ EP) |
| Area del package | 4.604025mm² (20-Ball WLCSP (1.955m x 2.355mm)) (ADP8861ACBZ-R7) |
| Package Height | 0.645mm (20-Ball WLCSP (1.955m x 2.355mm)) (ADP8861ACBZ-R7) | 0.6mm (20-Ball WLCSP (1.955m x 2.355mm)) (ADP8861ACBZ-R7) |
| Terminal Finish | E1, E3 |
| Product Description | Charge Pump, 7-Channel Smart LED Driver with I2C Interface |
| Evalref Circuit | Evaluation board |
| Temp Range | -40 to 85°C |
| Web Launch Date | 2010-04-28 |
| Output Voltage | 5.5 V |
| Led Driver Topology | Boost |
| Output Current Max | 30 mA |
| number of output channels | 7 |
| Interface Protocol | I²C |
| Led Driver Type | Charge Pump LED Driver |
| Customer Built Application | Cellular Phones |
| switching frequency typ | 1 MHz |
| vin max | 5.5 V |
| vin min | 2.5 V |
| Temperature Range | -40 to 85°C |
| Lifecycle | Production |
| Launch Date | 2010-04-28 |
Prezzo e imballaggio
| Parametro | Valore |
|---|---|
| Prezzo unitario | $1.61 |
| Tipo di imballaggio | 20-Lead LFCSP (4mm x 4mm w/ EP) |
| Pin | 20 |
| Campo di temperatura | -40 ~ 85 °C |
Domande frequenti
ADP8861ACPZ-R7 è disponibile?
ADP8861ACPZ-R7 non è attualmente disponibile; valuti alternative o richieda un preventivo.
ADP8861ACPZ-R7 è obsoleto (EOL)?
No, ADP8861ACPZ-R7 non è obsoleto; è attualmente in produzione ed è acquistabile.
Quale package usa ADP8861ACPZ-R7?
20-Ball WLCSP (1.955m x 2.355mm), 20-Lead LFCSP (4mm x 4mm w/ EP)
Qual è il range di tensione di alimentazione di ADP8861ACPZ-R7?
2.5 V – 5.5 V
In quale intervallo di temperatura opera ADP8861ACPZ-R7?
-40 to 85°C