Accueil›Série TCA9848
Pour vos besoins en approvisionnement, nous pouvons vous proposer un service et des prix améliorés via RS Components, Digi-Key Electronics, element14, Arrow Electronics, Avnet, Future Electronics, Chip1Stop, Transfer Multisort Elektronik, Verical et Newark. Contactez notre responsable commercial : Taurus@Raysen.hk, Sehat@Raysen.hk
Série TCA9848
The TCA9848 device has eight bidirectional translating switches that can be controlled through the I2C bus. The SCL/SDA upstream pair fans out to eight downstream pairs, or channels. Any individual SCn/SDn channel or combination of channels can be selected, determined by the contents of the programmable control register. These downstream channels can be used to resolve I2C target address conflicts. For example, if eight identical digital temperature sensors are needed in the application, one sensor can be connected at each channel: 0-7. The system controller can reset the TCA9848 in the event of a time-out, or other improper operation by asserting a low in the RESET input. Similarly, the power-on reset deselects all channels and initializes the I2C/SMBus state machine. Asserting RESET causes the same reset and initialization to occur without powering down the part. This allows recovery if one of the downstream I2C buses get stuck in a low state. The pass gates of the switches are const
Commutateurs et multiplexeurs I2C et I3C
3 références
TI
TCA9848RGER
The TCA9848 device has eight bidirectional translating switches that can be controlled through the I2C bus. The SCL/SDA upstream pair fans out to eight downstream pairs, or channels. Any individual SCn/SDn channel or combination of channels can be selected, determined by the contents of the programmable control register. These downstream channels can be used to resolve I2C target address conflicts. For example, if eight identical digital temperature sensors are needed in the application, one sensor can be connected at each channel: 0-7. The system controller can reset the TCA9848 in the event of a time-out, or other improper operation by asserting a low in the RESET input. Similarly, the power-on reset deselects all channels and initializes the I2C/SMBus state machine. Asserting RESET causes the same reset and initialization to occur without powering down the part. This allows recovery if one of the downstream I2C buses get stuck in a low state. The pass gates of the switches are const
Rupture de stock