LT6211CDD#PBF
双通道、可编程电源电流、轨至轨输出、电流反馈放大器
Analog Devices
Rupture de stock
production
Operational Amplifiers
Amplificateurs
Documents officiels
Documents officielsSpécifications techniques
| Paramètre | Valeur |
|---|---|
| voltage supply span min | 3 V |
| voltage supply span max | 13.2 V |
| Bandwidth | 200 MHz |
| amp feature | C-Load Stable, Differential Input |
| Railtorail | Out V+, Out V- |
| Op Amp Feedback | Current Feedback Op Amp |
| Op Amp Input Technology | Bipolar |
| number of amps | 2 |
| PSRR | 85 dB |
| Input Offset Voltage Max | 6 mV |
| Input Offset Voltage Typ | 1 mV |
| Minimum Stable Gain | 1 V/V |
| Voltage Noise Density Typ | 6.5 nV/√Hz |
| Current Noise Density Typ | 4.5 pA/√Hz |
| Output Headroom Typ | 0.15 V |
| Common Mode Rejection Ratio Min | 46 dB |
| Common Mode Rejection Ratio Typ | 50 dB |
| In Voltneg Headroom Max | 1.2 V |
| In Voltneg Headroom Typ | 0.8 V |
| In Voltplus Headroom Max | 1.2 V |
| In Voltplus Headroom Typ | 0.8 V |
| Output Voltneg Headroom Max | 0.3 V |
| Output Voltneg Headroom Typ | 50 mV |
| Output Voltplus Headroom Max | 0.35 V |
| Power Supply Rejection Ratio Min | 60 dB |
| Settling Time 0 1 Typ | 20 ns |
| Slew Rate Typ | 700 V/µs |
| supply current per amplifier typ | 5.8 mA |
| Supply Current Per Amplifier Max | 8.3 mA |
| Amp Bandwidth 3 Db | 200 MHz |
| Temp Range Code | I, C | C, I |
| Package Code | 05-08-1699, 05-08-1661 |
| Package | 10-Lead DFN (3mm x 3mm w/ EP), 10-Lead MSOP |
| Surface du boîtier | 9mm² (10-Lead DFN (3mm x 3mm w/ EP)) (LT6211CDD#PBF) |
| Package Height | 0.75mm (10-Lead DFN (3mm x 3mm w/ EP)) (LT6211CDD#PBF) |
| Terminal Finish | E3 |
| Product Description | Dual Programmable Supply Current, R-R Output, Current Feedback Amplifiers |
| Temp Range | -40 to 85°C |
| Web Launch Date | 2004-01-20 |
| Voltage Supply min | 3 V |
| Voltage Supply max | 13.2 V |
| Rail-to-Rail | Out V+, Out V- |
| number of amps | 2 |
| PSRR typ | 85 dB |
| Input Offset Voltage Max | 6 mV |
| Input Offset Voltage Typ | 1 mV |
| Voltage Noise Density Typ | 6.5 nV/√Hz |
| Current Noise Density Typ | 4.5 pA/√Hz |
| Out V+ Headroom typ | 0.15 V |
| CMRR min | 46 dB |
| CMRR typ | 50 dB |
| In V- Headroom max | 1.2 V |
| In V- Headroom typ | 0.8 V |
| In V+ Headroom max | 1.2 V |
| In V+ Headroom typ | 0.8 V |
| Out V- Headroom max | 0.3 V |
| Out V- Headroom typ | 50 mV |
| Out V+ Headroom max | 0.35 V |
| PSRR min | 60 dB |
| Settling Time 0.1% typ | 20 ns |
| Slew Rate Typ | 700 V/µs |
| supply current per amplifier typ | 5.8 mA |
| Supply Current Per Amplifier Max | 8.3 mA |
| bandwidth -3 db | 200 MHz |
| Temperature Range | -40 to 85°C |
| Lifecycle | Production |
| Launch Date | 2004-01-20 |
| voltage supply span min | 3 V |
| voltage supply span max | 13.2 V |
Prix et conditionnement
| Paramètre | Valeur |
|---|---|
| Prix unitaire | $3.6 |
| Type de conditionnement | 10-Lead DFN (3mm x 3mm w/ EP) |
| Broches | 10 |
| Plage de température | 0 ~ 70 °C |
Foire aux questions
LT6211CDD#PBF est-il en stock ?
LT6211CDD#PBF est actuellement en rupture de stock ; envisagez des alternatives ou demandez un devis.
LT6211CDD#PBF est-il obsolète (EOL) ?
Non, LT6211CDD#PBF n'est pas obsolète ; il est toujours en production active et disponible à l'achat.
Quel boîtier utilise LT6211CDD#PBF ?
10-Lead DFN (3mm x 3mm w/ EP), 10-Lead MSOP
Quelle est la plage de tension d'alimentation de LT6211CDD#PBF ?
3 V – 13.2 V
Dans quelle plage de température LT6211CDD#PBF fonctionne-t-il ?
-40 to 85°C