ATTINY828-MU
The ATtiny828 8-bit AVR® RISC-based microcontroller (MCU) with picoPower® technology features 8 KB of in-system programmable (ISP) Flash, 256B ISP EEPROM, 512B internal SRAM, 8-bit timer/counter and 16-bit timer/counter with PWM, 10-bit ADC,USART, TWI, 2 x SPI, 32.768 kHz ultra-low power oscillator,
Microchip
En stock
Actif
8-bit MCUs
Microcontrôleurs (MCU) et processeurs
Documents officiels
Documents officielsSpécifications techniques
| Paramètre | Valeur |
|---|---|
| Status | In Production |
| Packages | 32\TQFP,32\VQFN |
| SPI | 1 |
| I2C | 1 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 10 |
| ADC Channels | 28 |
| Pincount | 32 |
| Program Memory size (KB) | 8 |
| Number of Comparators | 1 |
| Part Family | ATtiny828 |
| Operation Voltage Min.(V) | 1.7 |
| Operation Voltage Max.(V) | 5.5 |
| Peripheral Pin Select / Pin Muxing | No |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 0 |
| DAC Resolution (Bits) | 0 |
| I/O Pins Max | 28 |
| Number of DACs | 0 |
| CPU Speed (MIPS/DMIPS) | 20 |
| CPU | 8-bit AVR MCU |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 0 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 0 |
| LIN | No |
| DAC Outputs | 0 |
| Number of Op Amps | 0 |
| Watch Dog Timer | Yes |
| IrDA | No |
| Vbat/Vddbu battery backup | No |
| Architecture | 8 |
| CRC | No |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 0.5 |
| 16-Bit Digital Timers | 1 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 4 |
| U(S)ART | 1 -UART |
| RAM Bytes | 512 |
| Parallel Port | No |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 15 |
| Direct Memory Access (DMA) Channels | 0 |
| Hardware RTCC/RTC | No |
| 32-Bit Digital Timers | 0 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 0 |
| Low Power | Yes |
| CPU Speed Max MHz (megahertz) | 20 |
| Multiple output CCP (MCCP) | 0 |
| ADC Modules | 0 |
| Input Capture | 1 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 1 |
| Internal Voltage Reference (Bandgap) | Yes |
| Auxiliary Flash (KB) | 0 |
| PWM Resolution (ns) | 0 |
| 5k Pricing | 0.96 |
| 8-Bit Digital Timers | 1 x 8-bit |
| Comparator max speed (ns) | 0 |
| Data EEPROM (bytes) | 256 |
| Brown-Out Reset | Programmable BOR |
| Family | 8-bit MCU |
| Stand alone PWM | 4 |
| Internal Oscillator | Yes |
| Zero Cross Detect | No |
| Numerically Controlled Oscillator (NCO) | 0 |
| Hardware Limit Timer | No |
| Signal Measurement Timer | 0 |
| Enhanced Capture/Compare/PWM (ECCP) | 0 |
| Data Signal Modulator (DSM) | 0 |
| Bootload capable | Yes |
| Slope Compensation / Programmable Ramp Generator | No |
| Complementary Waveform Generator (CWG) / Complementary Output Generator (COG) Max dBc/Hz (decibels relative to carrier in a 1 Hz bandwidth) | 0 |
| ADC With Computation | No |
| Cap. Touch Channels | 0 |
| Angular Timer | No |
| USB | None |
| Code-Guard Security | None |
| JTAG Max TB (terabyte) | None |
| Type of CAN module | None |
| Ethernet | None |
Prix et conditionnement
| Paramètre | Valeur |
|---|---|
| Prix unitaire | ¥6.93 / 1ku |
| Prix dégressif | 1-24:8.94 25-99:8.2 100-999:7.4 1000-4999:6.93 5000-999999:6.46 |
| Type de conditionnement | VQFN |
| Broches | 32 |
| Support | TRAY |
| Plage de température | -40 ~ 85 °C |
Foire aux questions
ATTINY828-MU est-il en stock ?
ATTINY828-MU est actuellement en stock et disponible à la commande en ligne.
ATTINY828-MU est-il obsolète (EOL) ?
Non, ATTINY828-MU n'est pas obsolète ; il est toujours en production active et disponible à l'achat.
Quel boîtier utilise ATTINY828-MU ?
32\TQFP,32\VQFN
Combien de broches possède ATTINY828-MU ?
32
Quelle est la plage de tension d'alimentation de ATTINY828-MU ?
1.7 – 5.5
Dans quelle plage de température ATTINY828-MU fonctionne-t-il ?
-40 °C – 85 °C
À quelle architecture ou famille appartient ATTINY828-MU ?
8-bit MCU