ATMEGA328P-MN
The high-performance Microchip picoPower® 8-bit AVR® RISC-based microcontroller combines 32 KB ISP Flash memory with read-while-write capabilities, 1024B EEPROM, 2 KB SRAM, 23 general purpose I/O lines, 32 general purpose working registers, three flexible timer/counters with compare modes, internal
Microchip
En stock
Déconseillé pour nouvelles conceptions
Automotive Root of Trust
Microcontrôleurs (MCU) et processeurs
Documents officiels
Documents officielsSpécifications techniques
| Paramètre | Valeur |
|---|---|
| Status | Not Recommended for new designs |
| Packages | 28\SPDIP,28\VQFN,32\TQFP,32\VQFN |
| SPI | 2 |
| I2C | 1 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 10 |
| ADC Channels | 8 |
| Pincount | 32 |
| Program Memory size (KB) | 32 |
| Number of Comparators | 1 |
| Part Family | ATmega48 |
| Operation Voltage Min.(V) | 1.8 |
| Operation Voltage Max.(V) | 5.5 |
| Peripheral Pin Select / Pin Muxing | No |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 0 |
| DAC Resolution (Bits) | 0 |
| I/O Pins Max | 23 |
| Number of DACs | 0 |
| CPU Speed (MIPS/DMIPS) | 20 |
| CPU | 8-bit AVR MCU |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 0 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 0 |
| LIN | No |
| DAC Outputs | 0 |
| Number of Op Amps | 0 |
| Watch Dog Timer | Yes |
| IrDA | No |
| Vbat/Vddbu battery backup | No |
| Architecture | 8 |
| CRC | No |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 2 |
| 16-Bit Digital Timers | 1 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 6 |
| RAM Bytes | 2048 |
| Parallel Port | No |
| Segmented LCD (# of segments) | 0 |
| Hardware RTCC/RTC | Yes |
| ADC Modules | 0 |
| Capture / Compare/PWM (CCP) | 1 |
| Internal Voltage Reference (Bandgap) | Yes |
| 5k Pricing | 1.93 |
| 8-Bit Digital Timers | 2 x 8-bit |
| Data EEPROM (bytes) | 1024 |
| Brown-Out Reset | Programmable BOR |
| Family | 8-bit MCU |
| Stand alone PWM | 6 |
| Internal Oscillator | Yes |
| Zero Cross Detect | No |
| Numerically Controlled Oscillator (NCO) | 0 |
| Hardware Limit Timer | No |
| Signal Measurement Timer | 0 |
| Enhanced Capture/Compare/PWM (ECCP) | 0 |
| Data Signal Modulator (DSM) | 0 |
| Slope Compensation / Programmable Ramp Generator | No |
| Complementary Waveform Generator (CWG) / Complementary Output Generator (COG) Max dBc/Hz (decibels relative to carrier in a 1 Hz bandwidth) | 0 |
| ADC With Computation | No |
| Cap. Touch Channels | 16 |
| Angular Timer | No |
| USB | None |
| JTAG Max TB (terabyte) | None |
| Type of CAN module | None |
| Ethernet | None |
Prix et conditionnement
| Paramètre | Valeur |
|---|---|
| Prix unitaire | ¥14.32 / 1ku |
| Prix dégressif | 1-24:18.83 25-99:17.28 100-999:15.6 1000-4999:14.32 5000-999999:13.58 |
| Type de conditionnement | VQFN |
| Broches | 32 |
| Support | TRAY |
| Plage de température | -40 ~ 105 °C |
Foire aux questions
ATMEGA328P-MN est-il en stock ?
ATMEGA328P-MN est actuellement en stock et disponible à la commande en ligne.
ATMEGA328P-MN est-il obsolète (EOL) ?
ATMEGA328P-MN est en dernier achat (LTB) ou non recommandé pour les nouveaux designs ; stockez ou évaluez des alternatives.
Quel boîtier utilise ATMEGA328P-MN ?
28\SPDIP,28\VQFN,32\TQFP,32\VQFN
Combien de broches possède ATMEGA328P-MN ?
32
Quelle est la plage de tension d'alimentation de ATMEGA328P-MN ?
1.8 – 5.5
Dans quelle plage de température ATMEGA328P-MN fonctionne-t-il ?
-40 °C – 85 °C
À quelle architecture ou famille appartient ATMEGA328P-MN ?
8-bit MCU