ATSAM4S8CA-CFU
The Microchip's ARM®-based SAM4S8 microcontroller builds on the high-performance 32-bit ARM®-based Cortex®-M4 core. The SAM4S8 features: Maximum operating speed of 120MHz 512KB of flash memory and 128KB of SRAM 1.62V to 3.6V supply Power consumption 200µA/MHz in dynamic mode at low operating frequen
Microchip
En stock
Actif
32-bit Microcontroller
Microcontrôleurs (MCU) et processeurs
Documents officiels
Documents officielsSpécifications techniques
| Paramètre | Valeur |
|---|---|
| Status | In Production |
| Packages | 100\LQFP,100\TFBGA,100\VFBGA |
| SPI | 3 |
| I2C | 2 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 12 |
| ADC Channels | 15 |
| Pincount | 100 |
| Program Memory size (KB) | 512 |
| Number of Comparators | 1 |
| Part Family | ATSAM4S8C |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.6 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 1 |
| DAC Resolution (Bits) | 12 |
| I/O Pins Max | 79 |
| Number of DACs | 1 |
| CPU Speed (MIPS/DMIPS) | 150 |
| CPU | Cortex-M4 |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 2 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 16 |
| LIN | No |
| DAC Outputs | 2 |
| Number of Op Amps | 0 |
| Watch Dog Timer | No |
| IrDA | Yes |
| Vbat/Vddbu battery backup | No |
| Architecture | 32 |
| CRC | No |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 128 |
| 16-Bit Digital Timers | 6 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 8 |
| U(S)ART | 4 -UART |
| RAM Bytes | 131072 |
| Parallel Port | EBI |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 1000 |
| Direct Memory Access (DMA) Channels | 22 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 3 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 1 |
| Low Power | No |
| CPU Speed Max MHz (megahertz) | 120 |
| Multiple output CCP (MCCP) | 0 |
| ADC Modules | 1 |
| Input Capture | 12 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Internal Voltage Reference (Bandgap) | Yes |
| Auxiliary Flash (KB) | 0.512 |
| PWM Resolution (ns) | 0 |
| 8-Bit Digital Timers | 6 x 8-bit |
| Comparator max speed (ns) | 100 |
| Data EEPROM (bytes) | 0 |
| QSPI | 0 |
| External Memory Bus Interface | No |
| FPU | No |
| SDIO/SD-CARD/eMMC | 1 |
| Part Prefix | SAM4 |
| Ext. DRAM Interface | No |
| USB | Full Speed |
| Code-Guard Security | None |
| Type of CAN module | None |
| Ethernet | None |
Prix et conditionnement
| Paramètre | Valeur |
|---|---|
| Prix unitaire | ¥34.77 / 1ku |
| Prix dégressif | 1-24:46.13 25-99:41.96 100-999:37.99 1000-4999:34.77 5000-999999:33.35 |
| Type de conditionnement | VFBGA |
| Broches | 100 |
| Support | TRAY |
| Plage de température | -40 ~ 85 °C |
Foire aux questions
ATSAM4S8CA-CFU est-il en stock ?
ATSAM4S8CA-CFU est actuellement en stock et disponible à la commande en ligne.
ATSAM4S8CA-CFU est-il obsolète (EOL) ?
Non, ATSAM4S8CA-CFU n'est pas obsolète ; il est toujours en production active et disponible à l'achat.
Quel boîtier utilise ATSAM4S8CA-CFU ?
100\LQFP,100\TFBGA,100\VFBGA
Combien de broches possède ATSAM4S8CA-CFU ?
100
Quelle est la plage de tension d'alimentation de ATSAM4S8CA-CFU ?
1.62 – 3.6
Dans quelle plage de température ATSAM4S8CA-CFU fonctionne-t-il ?
-40 °C – 85 °C
À quelle architecture ou famille appartient ATSAM4S8CA-CFU ?
Cortex-M4