ATSAM4LS4BA-MU
A member of the Microchip's SAM4L family of Flash microcontrollers based on the ARM® Cortex®-M4 processor, the ATSAM4LS4B delivers the lowest power in active mode (90uA/MHz) as well as sleep mode (1.5uA) and the shortest wake-up time (down to 1.5us) in a Cortex-M4 device. Along with 256KB of embedde
Microchip
En stock
Actif
32-bit Microcontroller
Microcontrôleurs (MCU) et processeurs
Documents officiels
Documents officielsSpécifications techniques
| Paramètre | Valeur |
|---|---|
| Status | In Production |
| Packages | 64\TQFP,64\VQFN,64\WLCSP |
| SPI | 1 |
| I2C | 4 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 12 |
| ADC Channels | 7 |
| Pincount | 64 |
| Program Memory size (KB) | 256 |
| Number of Comparators | 2 |
| Part Family | ATSAM4LS4B |
| Operation Voltage Min.(V) | 1.68 |
| Operation Voltage Max.(V) | 3.6 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 1 |
| DAC Resolution (Bits) | 10 |
| I/O Pins Max | 48 |
| Number of DACs | 2 |
| CPU Speed (MIPS/DMIPS) | 60 |
| CPU | Cortex-M4 |
| Configurable Logic Cell (CLC/CCL) | 2 |
| Quadrature Encoder Interface | 0 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 0 |
| LIN | No |
| DAC Outputs | 1 |
| Number of Op Amps | 0 |
| Watch Dog Timer | Yes |
| IrDA | Yes |
| Vbat/Vddbu battery backup | No |
| Architecture | 32 |
| CRC | Yes |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 32 |
| 16-Bit Digital Timers | 3 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 0 |
| U(S)ART | 4 -UART |
| RAM Bytes | 32768 |
| Parallel Port | No |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 300 |
| Direct Memory Access (DMA) Channels | 16 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 0 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 1 |
| Low Power | Yes |
| CPU Speed Max MHz (megahertz) | 48 |
| Multiple output CCP (MCCP) | 0 |
| ADC Modules | 1 |
| Input Capture | 6 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Internal Voltage Reference (Bandgap) | Yes |
| Auxiliary Flash (KB) | 0 |
| PWM Resolution (ns) | 0 |
| 8-Bit Digital Timers | 0 x 8-bit |
| Comparator max speed (ns) | 67 |
| Data EEPROM (bytes) | 0 |
| QSPI | 0 |
| External Memory Bus Interface | No |
| FPU | No |
| SDIO/SD-CARD/eMMC | 0 |
| Part Prefix | SAM4 |
| Ext. DRAM Interface | No |
| Configurable Logic Cell Modules (CLC /CCL) Type | GLOC |
| USB | Full Speed |
| Code-Guard Security | None |
| Type of CAN module | None |
| Ethernet | None |
Prix et conditionnement
| Paramètre | Valeur |
|---|---|
| Prix unitaire | ¥34.97 / 1ku |
| Prix dégressif | 1-24:46.47 25-99:42.23 100-999:38.26 1000-4999:34.97 5000-999999:33.49 |
| Type de conditionnement | VQFN |
| Broches | 64 |
| Support | TRAY |
| Plage de température | -40 ~ 85 °C |
Foire aux questions
ATSAM4LS4BA-MU est-il en stock ?
ATSAM4LS4BA-MU est actuellement en stock et disponible à la commande en ligne.
ATSAM4LS4BA-MU est-il obsolète (EOL) ?
Non, ATSAM4LS4BA-MU n'est pas obsolète ; il est toujours en production active et disponible à l'achat.
Quel boîtier utilise ATSAM4LS4BA-MU ?
64\TQFP,64\VQFN,64\WLCSP
Combien de broches possède ATSAM4LS4BA-MU ?
64
Quelle est la plage de tension d'alimentation de ATSAM4LS4BA-MU ?
1.68 – 3.6
Dans quelle plage de température ATSAM4LS4BA-MU fonctionne-t-il ?
-40 °C – 85 °C
À quelle architecture ou famille appartient ATSAM4LS4BA-MU ?
Cortex-M4