ATSAM3X4EA-CU
Based on the ARM® Cortex®-M3 processor, the Microchip's SAM3X4E runs at 84MHz and features 256KB of flash memory in 2 x 128KB banks and 68KB of SRAM in 2 x 32KB banks, with an additional 4KB as NFC (NAND Flash controller) SRAM. Its highly-integrated peripheral set includes Ethernet, dual CAN, High S
Microchip
Rupture de stock
Actif
32-bit Microcontroller
Microcontrôleurs (MCU) et processeurs
Documents officiels
Documents officielsSpécifications techniques
| Paramètre | Valeur |
|---|---|
| Status | In Production |
| Packages | 144\LFBGA,144\LQFP |
| SPI | 4 |
| I2C | 2 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 12 |
| ADC Channels | 16 |
| Pincount | 144 |
| Program Memory size (KB) | 256 |
| Number of Comparators | 0 |
| Part Family | ATSAM3X4E |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.6 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 2 |
| Number of USB Modules | 1 |
| DAC Resolution (Bits) | 12 |
| I/O Pins Max | 103 |
| Number of DACs | 1 |
| CPU Speed (MIPS/DMIPS) | 84 |
| CPU | Cortex-M3 |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 2 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 0 |
| LIN | Yes |
| DAC Outputs | 2 |
| Number of Op Amps | 0 |
| Watch Dog Timer | No |
| IrDA | Yes |
| Vbat/Vddbu battery backup | No |
| Architecture | 32 |
| CRC | No |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 64 |
| 16-Bit Digital Timers | 0 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 8 |
| U(S)ART | 5 -UART |
| RAM Bytes | 65536 |
| Parallel Port | EBI |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 1000 |
| Direct Memory Access (DMA) Channels | 23 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 9 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 1 |
| Low Power | No |
| CPU Speed Max MHz (megahertz) | 84 |
| Multiple output CCP (MCCP) | 0 |
| ADC Modules | 1 |
| Input Capture | 6 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Internal Voltage Reference (Bandgap) | Yes |
| Auxiliary Flash (KB) | 0 |
| PWM Resolution (ns) | 0 |
| 8-Bit Digital Timers | 0 x 8-bit |
| Comparator max speed (ns) | 0 |
| Data EEPROM (bytes) | 0 |
| QSPI | 0 |
| External Memory Bus Interface | No |
| FPU | No |
| SDIO/SD-CARD/eMMC | 1 |
| Part Prefix | SAM3 |
| Ext. DRAM Interface | No |
| USB | High Speed |
| Number of Ethernet Ports | No |
| Code-Guard Security | None |
| Type of CAN module | None |
| Ethernet | 10/100 Base-TX Mac |
Prix et conditionnement
| Paramètre | Valeur |
|---|---|
| Prix unitaire | ¥66.91 / 1ku |
| Prix dégressif | 1-24:89.03 25-99:80.76 100-999:73.23 1000-4999:66.91 5000-999999:64.29 |
| Type de conditionnement | LFBGA |
| Broches | 144 |
| Support | TRAY |
| Plage de température | -40 ~ 85 °C |
Foire aux questions
ATSAM3X4EA-CU est-il en stock ?
ATSAM3X4EA-CU est actuellement en rupture de stock ; envisagez des alternatives ou demandez un devis.
ATSAM3X4EA-CU est-il obsolète (EOL) ?
Non, ATSAM3X4EA-CU n'est pas obsolète ; il est toujours en production active et disponible à l'achat.
Quel boîtier utilise ATSAM3X4EA-CU ?
144\LFBGA,144\LQFP
Combien de broches possède ATSAM3X4EA-CU ?
144
Quelle est la plage de tension d'alimentation de ATSAM3X4EA-CU ?
1.62 – 3.6
Dans quelle plage de température ATSAM3X4EA-CU fonctionne-t-il ?
-40 °C – 85 °C
À quelle architecture ou famille appartient ATSAM3X4EA-CU ?
Cortex-M3