ATSAM3S8BA-MU
The SAM3S8B is a member of the Microchip's SAM3S series microcontrollers based on the high-performance 32-bit ARM® Cortex®-M3 RISC processor. It operates at a maximum speed of 64MHz and features 512KB of flash memory and 64KB of SRAM. The extensive peripheral set includes a Full Speed USB device por
Microchip
Rupture de stock
Actif
32-bit Microcontroller
Microcontrôleurs (MCU) et processeurs
Documents officiels
Documents officielsSpécifications techniques
| Paramètre | Valeur |
|---|---|
| Status | In Production |
| Packages | 64\LQFP,64\VQFN |
| SPI | 3 |
| I2C | 2 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 12 |
| ADC Channels | 10 |
| Pincount | 64 |
| Program Memory size (KB) | 512 |
| Number of Comparators | 1 |
| Part Family | ATSAM3S8B |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.6 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 1 |
| DAC Resolution (Bits) | 12 |
| I/O Pins Max | 47 |
| Number of DACs | 1 |
| CPU Speed (MIPS/DMIPS) | 80 |
| CPU | Cortex-M3 |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 1 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 0 |
| LIN | No |
| DAC Outputs | 2 |
| Number of Op Amps | 0 |
| Watch Dog Timer | No |
| IrDA | Yes |
| Vbat/Vddbu battery backup | No |
| Architecture | 32 |
| CRC | Yes |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 64 |
| 16-Bit Digital Timers | 6 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 4 |
| U(S)ART | 4 -UART |
| RAM Bytes | 65536 |
| Parallel Port | No |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 1000 |
| Direct Memory Access (DMA) Channels | 22 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 0 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 1 |
| Low Power | No |
| CPU Speed Max MHz (megahertz) | 64 |
| Multiple output CCP (MCCP) | 0 |
| ADC Modules | 1 |
| Input Capture | 6 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Internal Voltage Reference (Bandgap) | Yes |
| Auxiliary Flash (KB) | 0 |
| PWM Resolution (ns) | 0 |
| 8-Bit Digital Timers | 0 x 8-bit |
| Comparator max speed (ns) | 100 |
| Data EEPROM (bytes) | 0 |
| QSPI | 0 |
| External Memory Bus Interface | No |
| FPU | No |
| SDIO/SD-CARD/eMMC | 1 |
| Part Prefix | SAM3 |
| Ext. DRAM Interface | No |
| USB | Full Speed |
| Code-Guard Security | None |
| Type of CAN module | None |
| Ethernet | None |
Prix et conditionnement
| Paramètre | Valeur |
|---|---|
| Prix unitaire | ¥40.01 / 1ku |
| Prix dégressif | 1-24:53.06 25-99:48.28 100-999:43.71 1000-4999:40.01 5000-999999:38.33 |
| Type de conditionnement | VQFN |
| Broches | 64 |
| Support | TRAY |
| Plage de température | -40 ~ 85 °C |
Foire aux questions
ATSAM3S8BA-MU est-il en stock ?
ATSAM3S8BA-MU est actuellement en rupture de stock ; envisagez des alternatives ou demandez un devis.
ATSAM3S8BA-MU est-il obsolète (EOL) ?
Non, ATSAM3S8BA-MU n'est pas obsolète ; il est toujours en production active et disponible à l'achat.
Quel boîtier utilise ATSAM3S8BA-MU ?
64\LQFP,64\VQFN
Combien de broches possède ATSAM3S8BA-MU ?
64
Quelle est la plage de tension d'alimentation de ATSAM3S8BA-MU ?
1.62 – 3.6
Dans quelle plage de température ATSAM3S8BA-MU fonctionne-t-il ?
-40 °C – 85 °C
À quelle architecture ou famille appartient ATSAM3S8BA-MU ?
Cortex-M3