AD9363BBCZ
RF捷变收发器
Analog Devices
Rupture de stock
contactADI
Software Defined Radio
RF et microondes
Documents officiels
Documents officielsSpécifications techniques
| Paramètre | Valeur |
|---|---|
| Number Of Outputs | 2 |
| frequency response max | 3.8 GHz |
| frequency response min | 325 MHz |
| Positive Supply Voltage Max | 3.3 V |
| Positive Supply Voltage Min | 1.3 V |
| number of inputs | 2 |
| Noise Figure Typ | 2.5 dB |
| Opip3 Typ | 19 dBm |
| ADC Resolution | 12 bits |
| DAC Resolution | 12 bits |
| Adc Instantaneous Bandwidth Max | 20 MHz |
| adc positive supply voltage max | 3.3 V |
| adc positive supply voltage min | 1.3 V |
| Iip3 Typ | -14 dBm |
| Rf Digital Device Type | Digital Transceiver |
| Instantaneous Bandwidth Max | 20 MHz |
| Architecture | Low-IF, Zero-IF |
| Sample rate | 61.44 Msps |
| Transmitter Resolution | 12 bits |
| Receiver Resolution | 12 bits |
| Transmitter Output Type | Differential Output |
| Receiver Input Type | Differential Input, Single-Ended Input |
| Number Of Transmitter Outputs | 2 |
| Number Of Receiver Inputs | 2 |
| Trans Sample Rate Min | 520.8 ksps |
| Instantaneous Bandwidth Min | 200 kHz |
| Image Rejection Typ | 50 dBc |
| Iip3 Typ Sdr | -14 dBm |
| Input Type | Differential Input, Single-Ended Input |
| Customer Built Product | Femtocells |
| Industry | Communications & IT |
| communication protocols & standards | Software Defined Radio|3G|4G |
| Interface Signal | CMOS, LVDS, SPI |
| Signal Domain | RF |
| Package Code | BC-144-7 |
| Package | 144-Ball CSPBGA (10mm x 10mm x 1.7mm) |
| Surface du boîtier | 100mm² (144-Ball CSPBGA (10mm x 10mm x 1.7mm)) (AD9363ABCZ) |
| Package Height | 1.7mm (144-Ball CSPBGA (10mm x 10mm x 1.7mm)) (AD9363ABCZ) |
| Terminal Finish | E1 |
| Product Description | RF Agile Transceiver |
| Evalref Circuit | Evaluation board |
| Temp Range | -40 to 85°C |
| Web Launch Date | 2016-11-09 |
| frequency response max | 3.8 GHz |
| frequency response min | 325 MHz |
| Noise Figure Typ | 2.5 dB |
| OIP3 typ | 19 dBm |
| Device Type | Digital Transceiver |
| Instantaneous Bandwidth Max | 20 MHz |
| Output I/Q Rate max | 61.44 Msps |
| Transmitter Resolution (bits) | 12 bits |
| Receiver Resolution (bits) | 12 bits |
| Number Of Outputs | 2 |
| number of inputs | 2 |
| Output I/Q Rate min | 520.8 ksps |
| Instantaneous Bandwidth Min | 200 kHz |
| Image Rejection Typ | 50 dBc |
| Iip3 Typ | -14 dBm |
| Customer Built Application | Femtocells |
| communication protocols and standards | Software Defined Radio|3G|4G |
| Interface Protocol | CMOS, LVDS, SPI |
| Temperature Range | -40 to 85°C |
| Lifecycle | Recommended For New Designs |
| Launch Date | 2016-11-09 |
Prix et conditionnement
| Paramètre | Valeur |
|---|---|
| Type de conditionnement | 144-Ball CSPBGA (10mm x 10mm x 1.7mm) |
| Broches | 144 |
Foire aux questions
AD9363BBCZ est-il en stock ?
AD9363BBCZ est actuellement en rupture de stock ; envisagez des alternatives ou demandez un devis.
AD9363BBCZ est-il obsolète (EOL) ?
Non, AD9363BBCZ n'est pas obsolète ; il est toujours en production active et disponible à l'achat.
Quel boîtier utilise AD9363BBCZ ?
144-Ball CSPBGA (10mm x 10mm x 1.7mm)
Quelle est la plage de tension d'alimentation de AD9363BBCZ ?
1.3 V – 3.3 V
Dans quelle plage de température AD9363BBCZ fonctionne-t-il ?
-40 to 85°C
À quelle architecture ou famille appartient AD9363BBCZ ?
Low-IF, Zero-IF