ATSAMD20J18A-CU
SAMD20, 256KB Flash, 32KB RAM, ARM Cortex M0+, low power, 64-pin
Microchip
En stock
Activo
32-bit Microcontroller
Microcontroladores (MCU) y procesadores
Documentos oficiales
Documentos oficialesEspecificaciones técnicas
| Parámetro | Valor |
|---|---|
| Status | In Production |
| Packages | 64\QFN,64\TQFP,64\UFBGA,64\VQFN |
| SPI | 6 |
| I2C | 6 |
| TempRange Max | 105 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 12 |
| ADC Channels | 20 |
| Pincount | 64 |
| Program Memory size (KB) | 256 |
| Number of Comparators | 2 |
| Part Family | SAMD20 |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.63 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 0 |
| DAC Resolution (Bits) | 10 |
| I/O Pins Max | 52 |
| Number of DACs | 1 |
| CPU Speed (MIPS/DMIPS) | 45 |
| CPU | Cortex-M0+ |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 0 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 16 |
| LIN | No |
| DAC Outputs | 1 |
| Number of Op Amps | 0 |
| Watch Dog Timer | Yes |
| IrDA | No |
| Vbat/Vddbu battery backup | No |
| Arquitectura | 32 |
| CRC | Yes |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 32 |
| 16-Bit Digital Timers | 8 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 16 |
| U(S)ART | 6 -UART |
| RAM Bytes | 32768 |
| Parallel Port | GPIO |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 350 |
| Direct Memory Access (DMA) Channels | 0 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 4 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 0 |
| Low Power | Yes |
| CPU Speed Max MHz (megahertz) | 48 |
| Multiple output CCP (MCCP) | 0 |
| ADC Modules | 1 |
| Input Capture | 8 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Auxiliary Flash (KB) | 0.064 |
| PWM Resolution (ns) | 0 |
| 5k Pricing | 2.46 |
| 8-Bit Digital Timers | 8 x 8-bit |
| Comparator max speed (ns) | 116 |
| Data EEPROM (bytes) | 0 |
| Family | 32-bit MCU |
| Stand alone PWM | 0 |
| Internal Oscillator | 32khz, 32Khz ULP, 8Mhz |
| Zero Cross Detect | No |
| Numerically Controlled Oscillator (NCO) | 0 |
| Hardware Limit Timer | No |
| Signal Measurement Timer | 0 |
| Enhanced Capture/Compare/PWM (ECCP) | 0 |
| Data Signal Modulator (DSM) | 0 |
| Bootload capable | Yes |
| Slope Compensation / Programmable Ramp Generator | No |
| Complementary Waveform Generator (CWG) / Complementary Output Generator (COG) Max dBc/Hz (decibels relative to carrier in a 1 Hz bandwidth) | 0 |
| QSPI | 0 |
| External Memory Bus Interface | No |
| Cap. Touch Channels | 256 |
| SMPS | 0 |
| FPU | No |
| SDIO/SD-CARD/eMMC | 0 |
| Standalone Output Compare/ Standard PWM | 16 |
| Part Prefix | SAMD |
| Ext. DRAM Interface | No |
| Temp. Sensor | Yes |
| Timers | 8 |
| USB | None |
| Diff ADC Inputs | 20 |
| Number of Ethernet Ports | No |
| Debug Interface | SWD |
| ADC Sample/Hold | 1 |
| Camera Interface | No |
| Code-Guard Security | None |
| NAND Interface | No |
| Output Compare Channels | 16 |
| H/W Video Decoder | No |
| Number of Cores | 0 |
| Hardware Touch Peripheral | PTC |
| JTAG Max TB (terabyte) | Debug/Program |
| ARM Neon | No |
| Focus | No |
| Programmable Gain Amp (PGA) | 1 |
| ECC Program Flash (Error Correction Code) | No |
| CODEC Interface (I2S, AC97) | No |
| XLP | No |
| ARM Trust Zone | No |
| Type of CAN module | None |
| MMU | No |
| Supported in MPLAB Code Configurator | No |
| SQI | 0 |
| MSSP(SPI/I2C) | 0 |
| Ethernet | None |
| Automotive Qualified | 0 |
| Hardware QTouch Acquisition | Yes |
Precio y embalaje
| Parámetro | Valor |
|---|---|
| Precio unitario | ¥18.63 / 1ku |
| Precio por volumen | 1-24:24.81 25-99:22.46 100-999:20.31 1000-4999:18.63 5000-999999:17.89 |
| Tipo de envase | UFBGA |
| Patillas | 64 |
| Embalaje | TRAY |
| Rango de temperatura | -40 ~ 85 °C |
Preguntas frecuentes
¿Está ATSAMD20J18A-CU en stock?
ATSAMD20J18A-CU está actualmente en stock y disponible para pedir en línea.
¿Está ATSAMD20J18A-CU descontinuado (EOL)?
No, ATSAMD20J18A-CU no está descontinuado; sigue en producción activa y se puede comprar con normalidad.
¿Qué encapsulado utiliza ATSAMD20J18A-CU?
64\QFN,64\TQFP,64\UFBGA,64\VQFN
¿Cuántos pines tiene ATSAMD20J18A-CU?
64
¿Cuál es el rango de tensión de alimentación de ATSAMD20J18A-CU?
1.62 – 3.63
¿En qué rango de temperatura opera ATSAMD20J18A-CU?
-40 °C – 105 °C
¿A qué arquitectura o familia pertenece ATSAMD20J18A-CU?
32-bit MCU