AT89LP213
Low-power, high-performance CMOS 8-bit microcontroller with 2KB of ISP flash memory. The device uses Microchip high-density nonvolatile memory technology and is compatible with the industry-standard MCS??-51 instruction set. An enhanced CPU core can fetch a single byte from memory every clock cycle
Microchip
Sin stock
Activo
8-bit MCUs
Microcontroladores (MCU) y procesadores
Documentos oficiales
Documentos oficialesEspecificaciones técnicas
| Parámetro | Valor |
|---|---|
| Status | In Production |
| SPI | 1 |
| I2C | 0 |
| TempRange Max | 0 °C |
| TempRange Min | 0 °C |
| ADC Resolution (bits) | 0 |
| ADC Channels | 0 |
| Pincount | 14 |
| Program Memory size (KB) | 2 |
| Number of Comparators | 0 |
| Part Family | 8051-1C |
| Operation Voltage Min.(V) | 2.4 |
| Operation Voltage Max.(V) | 5.5 |
| Peripheral Pin Select / Pin Muxing | No |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 0 |
| DAC Resolution (Bits) | 0 |
| I/O Pins Max | 14 |
| Number of DACs | 0 |
| CPU Speed (MIPS/DMIPS) | 20 |
| CPU | 8-bit 8051 MCU |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 0 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 0 |
| LIN | No |
| DAC Outputs | 0 |
| Number of Op Amps | 0 |
| Watch Dog Timer | Yes |
| IrDA | No |
| Vbat/Vddbu battery backup | No |
| Arquitectura | 8 |
| CRC | No |
| Power On Reset | No |
| Crypto Engine | No |
| RAM KB (kilobyte) | 0 |
| 16-Bit Digital Timers | 0 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 0 |
| U(S)ART | 0 -UART |
| RAM Bytes | 0 |
| Parallel Port | No |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 0 |
| Direct Memory Access (DMA) Channels | 0 |
| Hardware RTCC/RTC | N/A |
| 32-Bit Digital Timers | 0 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 0 |
| Low Power | No |
| CPU Speed Max MHz (megahertz) | 20 |
| Multiple output CCP (MCCP) | 0 |
| ADC Modules | 0 |
| Input Capture | 0 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Internal Voltage Reference (Bandgap) | No |
| Auxiliary Flash (KB) | 0 |
| PWM Resolution (ns) | 0 |
| 8-Bit Digital Timers | 0 x 8-bit |
| Comparator max speed (ns) | 0 |
| Data EEPROM (bytes) | 0 |
| Family | 8-bit MCU |
| Stand alone PWM | 0 |
| Internal Oscillator | No |
| Zero Cross Detect | No |
| Numerically Controlled Oscillator (NCO) | 0 |
| Hardware Limit Timer | No |
| Signal Measurement Timer | 0 |
| Enhanced Capture/Compare/PWM (ECCP) | 0 |
| Data Signal Modulator (DSM) | 0 |
| Bootload capable | No |
| Slope Compensation / Programmable Ramp Generator | No |
| Complementary Waveform Generator (CWG) / Complementary Output Generator (COG) Max dBc/Hz (decibels relative to carrier in a 1 Hz bandwidth) | 0 |
| ADC With Computation | No |
| Cap. Touch Channels | 0 |
| Angular Timer | No |
| USB | None |
| Code-Guard Security | None |
| JTAG Max TB (terabyte) | None |
| Ethernet | None |
Precio y embalaje
| Parámetro | Valor |
|---|---|
| Patillas | 14 |
| Rango de temperatura | 0 ~ 0 °C |
Preguntas frecuentes
¿Está AT89LP213 en stock?
AT89LP213 no está en stock actualmente; consulte alternativas o solicite cotización.
¿Está AT89LP213 descontinuado (EOL)?
No, AT89LP213 no está descontinuado; sigue en producción activa y se puede comprar con normalidad.
¿Cuántos pines tiene AT89LP213?
14
¿Cuál es el rango de tensión de alimentación de AT89LP213?
2.4 – 5.5
¿En qué rango de temperatura opera AT89LP213?
0 °C – 0 °C
¿A qué arquitectura o familia pertenece AT89LP213?
8-bit MCU