ATTINY13-20MU
The high-performance, low-power Microchip 8-bit AVR® RISC-based microcontroller combines 1 KB ISP Flash memory, 64B SRAM, 64B EEPROM, a 32B register file, and a 4-channel 10-bit A/D converter. The device supports a throughput of 20 MIPS at 20 MHz and operates between 2.7-5.5 volts. By executing powe
Microchip
In stock
Active
8-bit MCUs
Microcontrollers & Processors
Official documents
Official documentsSpecifications
| Parameter | Value |
|---|---|
| Status | In Production |
| Packages | 10\VDFN | 20\WQFN | 8\PDIP | 8\SOIC | 8\SOIJ |
| SPI | 0 |
| I2C | 0 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 10 |
| ADC Channels | 4 |
| Pincount | 8 |
| Program Memory size (KB) | 1 |
| Number of Comparators | 1 |
| Part Family | ATtiny13 |
| Operation Voltage Min.(V) | 1.8 |
| Operation Voltage Max.(V) | 5.5 |
| Peripheral Pin Select / Pin Muxing | No |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 0 |
| DAC Resolution (Bits) | 0 |
| I/O Pins Max | 6 |
| Number of DACs | 0 |
| CPU Speed (MIPS/DMIPS) | 20 |
| CPU | 8-bit AVR MCU |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 0 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 0 |
| LIN | No |
| DAC Outputs | 0 |
| Number of Op Amps | 0 |
| Watch Dog Timer | Yes |
| IrDA | No |
| Vbat/Vddbu battery backup | No |
| Architecture | 8 |
| CRC | No |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 0.06 |
| 16-Bit Digital Timers | 0 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 2 |
| U(S)ART | 0 -UART |
| RAM Bytes | 64 |
| Parallel Port | No |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 15 |
| Direct Memory Access (DMA) Channels | 0 |
| Hardware RTCC/RTC | No |
| 32-Bit Digital Timers | 0 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 0 |
| Low Power | No |
| CPU Speed Max MHz (megahertz) | 20 |
| Multiple output CCP (MCCP) | 0 |
| ADC Modules | 0 |
| Input Capture | 0 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Internal Voltage Reference (Bandgap) | Yes |
| Auxiliary Flash (KB) | 0 |
| PWM Resolution (ns) | 0 |
| 5k Pricing | 0.90 |
| 8-Bit Digital Timers | 1 x 8-bit |
| Comparator max speed (ns) | 0 |
| Data EEPROM (bytes) | 64 |
| Brown-Out Reset | Programmable BOR |
| Family | 8-bit MCU |
| Stand alone PWM | 2 |
| Internal Oscillator | Yes |
| Zero Cross Detect | No |
| Numerically Controlled Oscillator (NCO) | 0 |
| Hardware Limit Timer | No |
| Signal Measurement Timer | 0 |
| Enhanced Capture/Compare/PWM (ECCP) | 0 |
| Data Signal Modulator (DSM) | 0 |
| Bootload capable | Yes |
| Slope Compensation / Programmable Ramp Generator | No |
| Complementary Waveform Generator (CWG) / Complementary Output Generator (COG) Max dBc/Hz (decibels relative to carrier in a 1 Hz bandwidth) | 0 |
| ADC With Computation | No |
| Cap. Touch Channels | 0 |
| Angular Timer | No |
| USB | None |
| Code-Guard Security | None |
| JTAG Max TB (terabyte) | None |
| Ethernet | None |
Price & Packaging
| Parameter | Value |
|---|---|
| Unit price | ¥8.47 / 1ku |
| Tier price | 1-24:11.1 25-99:10.15 100-999:9.28 1000-4999:8.47 5000-999999:8.14 |
| Package type | WQFN |
| Pins | 20 |
| Carrier | TRAY |
| Temp. range | -40 ~ 85 °C |
FAQ
Is ATTINY13-20MU in stock?
ATTINY13-20MU is currently in stock and available to order online.
Is ATTINY13-20MU discontinued (EOL)?
No, ATTINY13-20MU is not discontinued; it is currently in production and available to buy.
What package does ATTINY13-20MU use?
10\VDFN | 20\WQFN | 8\PDIP | 8\SOIC | 8\SOIJ
How many pins does ATTINY13-20MU have?
8
What is the supply voltage range of ATTINY13-20MU?
1.8 – 5.5
Within what temperature range does ATTINY13-20MU operate?
-40 °C – 85 °C
What architecture or family does ATTINY13-20MU belong to?
8-bit MCU