ATSAMA5D21C-CU
The SAMA5D21 is a high-performance, low-power Arm Cortex-A5 CPU-based embedded microprocessor (MPU) running up to 500 MHz, with support for multiple memories such as DDR2, DDR3L, LPDDR2, LPDDR3, and QSPI and e.MMC Flash. The device integrates powerful peripherals for connectivity and user interface
Microchip
Out of stock
Active
32-bit MPUs
Microcontrollers & Processors
Official documents
Official documentsSpecifications
| Parameter | Value |
|---|---|
| Status | In Production |
| Packages | 196\TFBGA |
| SPI | 6 |
| I2C | 6 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 12 |
| ADC Channels | 5 |
| Pincount | 196 |
| Program Memory size (KB) | 0 |
| Number of Comparators | 0 |
| Part Family | SAMA5D2,SOC |
| Operation Voltage Min.(V) | 1.1 |
| Operation Voltage Max.(V) | 1.32 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 2 |
| DAC Resolution (Bits) | 0 |
| I/O Pins Max | 72 |
| Number of DACs | 0 |
| CPU Speed (MIPS/DMIPS) | 785 |
| CPU | Cortex-A5 |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 2 |
| Number of PWM Time Bases | 9 |
| PWM Resolution (Bits) | 32 |
| LIN | Yes |
| DAC Outputs | 0 |
| Number of Op Amps | 0 |
| Watch Dog Timer | Yes |
| IrDA | Yes |
| Vbat/Vddbu battery backup | Yes |
| Architecture | 32 |
| CRC | Yes |
| Power On Reset | Yes |
| Crypto Engine | Yes |
| RAM KB (kilobyte) | 128 |
| 16-Bit Digital Timers | 4 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 13 |
| U(S)ART | 9 -UART |
| RAM Bytes | 131072 |
| Parallel Port | EBI |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 8 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 1000 |
| Direct Memory Access (DMA) Channels | 51 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 5 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 2 |
| Low Power | No |
| CPU Speed Max MHz (megahertz) | 500 |
| Multiple output CCP (MCCP) | 0 |
| ADC Modules | 1 |
| Input Capture | 5 |
| Graphics Controller/GPU | Yes |
| Capture / Compare/PWM (CCP) | 0 |
| Internal Voltage Reference (Bandgap) | Yes |
| Auxiliary Flash (KB) | 0 |
| PWM Resolution (ns) | 3 |
| 8-Bit Digital Timers | 0 x 8-bit |
| Comparator max speed (ns) | 0 |
| Brown-Out Reset | None |
| Family | 32-bit MPU |
| QSPI | 2 |
| External Memory Bus Interface | Program/Data |
| SMPS | 0 |
| FPU | Yes |
| SDIO/SD-CARD/eMMC | 1 |
| Standalone Output Compare/ Standard PWM | 5 |
| Ext. DRAM Interface | LPDDR/DDR2/LPDDR2/DDR3/LPDDR3 |
| Class B Safety Library | No |
| Low Voltage Detection | None |
| Configurable Logic Cell Modules (CLC /CCL) Type | CLC |
| Temp. Sensor | Yes |
| USB | High Speed |
| Number of Ethernet Ports | 1 |
| Camera Interface | Yes |
| Code-Guard Security | Advanced |
| NAND Interface | Yes |
| H/W Video Decoder | No |
| Number of Cores | 0.5 |
| Hardware Touch Peripheral | PTC |
| ARM Neon | Yes |
| ARM Trust Zone | Yes |
| Type of CAN module | None |
| Anti-Tampering Inputs | 6 |
| Ethernet | 10/100 Base-TX Mac |
| L1 Cache Memory (Data) (KB) | 32 |
| L1 Cache Memory (Instructions) (KB) | 32 |
| Secure Bootloader | Yes |
| Number of EBIs | 1 |
| 10/100/1000 Ethernet MAC | 0 -10/100/1000 Ethernet |
| Graphic LCD Interface | 24 |
| Secure Key Storage (bits) | 544 |
| Internal DRAM MB (megabyte) | 0 |
| Environmental Monitors | No |
| External Memory Encryption/Descryption | No |
| L2 Cache | 128 |
| ECC bits on NAND interface | 32 |
| Ext. DRAM Bus | 16 |
| Integrity Check Monitor (ICM) | Yes |
| Active Die Shield | Yes |
| Ethernet PTP & AVB Support | No |
| Int. DRAM Type | DDR2 |
Price & Packaging
| Parameter | Value |
|---|---|
| Unit price | ¥43.64 / 1ku |
| Tier price | 1-24:57.29 25-99:52.45 100-999:47.61 1000-4999:43.64 5000-999999:41.56 |
| Package type | TFBGA |
| Pins | 196 |
| Carrier | TRAY |
| Temp. range | -40 ~ 85 °C |
FAQ
Is ATSAMA5D21C-CU in stock?
ATSAMA5D21C-CU is currently out of stock; consider alternative parts or request a quote.
Is ATSAMA5D21C-CU discontinued (EOL)?
No, ATSAMA5D21C-CU is not discontinued; it is currently in production and available to buy.
What package does ATSAMA5D21C-CU use?
196\TFBGA
How many pins does ATSAMA5D21C-CU have?
196
What is the supply voltage range of ATSAMA5D21C-CU?
1.1 – 1.32
Within what temperature range does ATSAMA5D21C-CU operate?
-40 °C – 85 °C
What architecture or family does ATSAMA5D21C-CU belong to?
32-bit MPU