ATSAM4S2AB-MN
Microchip's ARM®-based SAM4S2A microcontroller builds on the high-performance 32-bit Cortex®-M4 core. The SAM4S2A features: Maximum operating speed of 120MHz 128KB of flash memory and 64KB of SRAM 1.62V to 3.6V supply Power consumption of 180uA/MHz in dynamic mode, below 25uA in RAM retention mode a
Microchip
In stock
Active
32-bit Microcontroller
Microcontrollers & Processors
Official documents
Official documentsSpecifications
| Parameter | Value |
|---|---|
| Status | In Production |
| Packages | 48\LQFP,48\VQFN |
| SPI | 2 |
| I2C | 2 |
| TempRange Max | 85 °C |
| TempRange Min | -40 °C |
| ADC Resolution (bits) | 12 |
| ADC Channels | 8 |
| Pincount | 48 |
| Program Memory size (KB) | 128 |
| Number of Comparators | 1 |
| Part Family | ATSAM4S2A |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.6 |
| Peripheral Pin Select / Pin Muxing | Yes |
| CAN/CAN-FD | 0 |
| Number of USB Modules | 1 |
| DAC Resolution (Bits) | 12 |
| I/O Pins Max | 34 |
| Number of DACs | 1 |
| CPU Speed (MIPS/DMIPS) | 150 |
| CPU | Cortex-M4 |
| Configurable Logic Cell (CLC/CCL) | 0 |
| Quadrature Encoder Interface | 1 |
| Number of PWM Time Bases | 0 |
| PWM Resolution (Bits) | 16 |
| LIN | No |
| DAC Outputs | 0 |
| Number of Op Amps | 0 |
| Watch Dog Timer | No |
| IrDA | Yes |
| Vbat/Vddbu battery backup | No |
| Architecture | 32 |
| CRC | No |
| Power On Reset | Yes |
| Crypto Engine | No |
| RAM KB (kilobyte) | 64 |
| 16-Bit Digital Timers | 6 x 16-bit |
| Hardware Cap Voltage Divider | No |
| PWM outputs (including complementary) | 8 |
| U(S)ART | 3 -UART |
| RAM Bytes | 65536 |
| Parallel Port | No |
| Segmented LCD (# of segments) | 0 |
| Motor Control PWM Outputs | 0 |
| Multiple Flash Panels | No |
| ADC Sampling Rate (ksps) | 1000 |
| Direct Memory Access (DMA) Channels | 22 |
| Hardware RTCC/RTC | Yes |
| 32-Bit Digital Timers | 3 x 32-bit |
| Single output CCP (SCCP) | 0 |
| Peripheral Trigger Generator | No |
| I2S | 1 |
| Low Power | No |
| CPU Speed Max MHz (megahertz) | 120 |
| Multiple output CCP (MCCP) | 0 |
| ADC Modules | 1 |
| Input Capture | 12 |
| Graphics Controller/GPU | No |
| Capture / Compare/PWM (CCP) | 0 |
| Internal Voltage Reference (Bandgap) | Yes |
| Auxiliary Flash (KB) | 0.512 |
| PWM Resolution (ns) | 0 |
| 8-Bit Digital Timers | 6 x 8-bit |
| Comparator max speed (ns) | 100 |
| Data EEPROM (bytes) | 0 |
| QSPI | 0 |
| External Memory Bus Interface | No |
| FPU | No |
| SDIO/SD-CARD/eMMC | 0 |
| Part Prefix | SAM4 |
| Ext. DRAM Interface | No |
| USB | Full Speed |
| Code-Guard Security | None |
| Type of CAN module | None |
| Ethernet | None |
Price & Packaging
| Parameter | Value |
|---|---|
| Unit price | ¥20.91 / 1ku |
| Tier price | 1-24:27.77 25-99:25.35 100-999:23 1000-4999:20.91 5000-999999:20.11 |
| Package type | VQFN |
| Pins | 48 |
| Carrier | TRAY |
| Temp. range | -40 ~ 105 °C |
FAQ
Is ATSAM4S2AB-MN in stock?
ATSAM4S2AB-MN is currently in stock and available to order online.
Is ATSAM4S2AB-MN discontinued (EOL)?
No, ATSAM4S2AB-MN is not discontinued; it is currently in production and available to buy.
What package does ATSAM4S2AB-MN use?
48\LQFP,48\VQFN
How many pins does ATSAM4S2AB-MN have?
48
What is the supply voltage range of ATSAM4S2AB-MN?
1.62 – 3.6
Within what temperature range does ATSAM4S2AB-MN operate?
-40 °C – 85 °C
What architecture or family does ATSAM4S2AB-MN belong to?
Cortex-M4