AD9361BBCZ
RF捷变收发器
Analog Devices
متوفر
RECOMMENDED FOR NEW DESIGNS
Software Defined Radio
RF والترددات الميكرووية
المستندات الرسمية
المستندات الرسميةالمواصفات الفنية
| المعامل | القيمة |
|---|---|
| Number Of Outputs | 2 |
| frequency response max | 6 GHz |
| frequency response min | 70 MHz |
| Positive Supply Voltage Max | 3.3 V |
| Positive Supply Voltage Min | 1.3 V |
| number of inputs | 2 |
| adc input polarity | - |
| Noise Figure Typ | 2.5 dB |
| Opip3 Typ | 19 dBm |
| analog input signal type | - |
| ADC Resolution | 12 bits |
| Adc Sampling Input Type | - |
| Dac Output Type | - |
| DAC Resolution | 12 bits |
| Dac Type | - |
| Adc Instantaneous Bandwidth Max | 56 MHz |
| adc positive supply voltage max | 3.3 V |
| adc positive supply voltage min | 1.3 V |
| Iip3 Typ | -14 dBm |
| Rf Digital Device Type | Digital Transceiver |
| Instantaneous Bandwidth Max | 56 MHz |
| المعمارية | Low-IF, Zero-IF |
| Sample rate | 61.44 Msps |
| Transmitter Resolution | 12 bits |
| Receiver Resolution | 12 bits |
| Transmitter Output Type | Differential Output |
| Receiver Input Type | Differential Input, Single-Ended Input |
| Number Of Transmitter Outputs | 2 |
| Number Of Receiver Inputs | 2 |
| Trans Sample Rate Min | 520.8 ksps |
| Instantaneous Bandwidth Min | 200 kHz |
| Image Rejection Typ | 50 dBc |
| Iip3 Typ Sdr | -14 dBm |
| adc architecture | - |
| Input Type | Differential Input, Single-Ended Input |
| Customer Built Product | Femtocells|Picocells |
| Industry | Communications & IT |
| communication protocols & standards | Software Defined Radio |
| Interface Signal | CMOS, LVDS, SPI |
| Signal Domain | RF |
| Package Code | BC-144-7 |
| Package | 144-Ball CSPBGA (10mm x 10mm x 1.7mm) |
| مساحة العبوة | 100mm² (144-Ball CSPBGA (10mm x 10mm x 1.7mm)) (AD9361BBCZ) |
| Package Height | 1.7mm (144-Ball CSPBGA (10mm x 10mm x 1.7mm)) (AD9361BBCZ) |
| Terminal Finish | E1 |
| Product Description | RF Agile Transceiver |
| Evalref Circuit | Reference Circuit, Evaluation board |
| Temp Range | -40 to 85°C |
| Web Launch Date | 2013-06-05 |
| frequency response max | 6 GHz |
| frequency response min | 70 MHz |
| Noise Figure Typ | 2.5 dB |
| OIP3 typ | 19 dBm |
| Device Type | Digital Transceiver |
| Instantaneous Bandwidth Max | 56 MHz |
| Output I/Q Rate max | 61.44 Msps |
| Transmitter Resolution (bits) | 12 bits |
| Receiver Resolution (bits) | 12 bits |
| Number Of Outputs | 2 |
| number of inputs | 2 |
| Output I/Q Rate min | 520.8 ksps |
| Instantaneous Bandwidth Min | 200 kHz |
| Image Rejection Typ | 50 dBc |
| Iip3 Typ | -14 dBm |
| Customer Built Application | Femtocells|Picocells |
| communication protocols and standards | Software Defined Radio |
| Interface Protocol | CMOS, LVDS, SPI |
| Temperature Range | -40 to 85°C |
| Lifecycle | Recommended For New Designs |
| Launch Date | 2013-06-05 |
السعر والتغليف
| المعامل | القيمة |
|---|---|
| سعر الوحدة | $258.41 / 1ku |
| نوع العبوة | 144-Ball CSPBGA (10mm x 10mm x 1.7mm) |
| نطاق درجة الحرارة | -40 ~ 85 °C |
الأسئلة الشائعة
هل AD9361BBCZ متوفر في المخزون؟
AD9361BBCZ متوفر حالياً في المخزون ويمكن طلبه عبر الإنترنت.
هل تم إيقاف إنتاج AD9361BBCZ (EOL)؟
لا، AD9361BBCZ لم يوقف إنتاجه؛ لا يزال قيد الإنتاج النشط ويمكن شراؤه.
ما هو غلاف AD9361BBCZ؟
144-Ball CSPBGA (10mm x 10mm x 1.7mm)
ما هو نطاق جهد التغذية لـ AD9361BBCZ؟
1.3 V – 3.3 V
في أي نطاق حراري يعمل AD9361BBCZ؟
-40 to 85°C
إلى أي معمارية أو عائلة ينتمي AD9361BBCZ؟
Low-IF, Zero-IF